AKG PZM6 D High-Performance Boundary Microphone
Usually arrives in 5-9 business days.
The AKG PZM11 LL WR is a professional weather-resistant boundary layer microphone designed for fast-food restaurants, outdoor intercoms, toll booths, SOS telephones, theme-park security and the like.
The AKG PZM11 LL WR is a professional weather-resistant boundary layer microphone designed for fast-food restaurants, outdoor intercoms, toll booths, SOS telephones, theme-park security and the like. A plastic membrane inside the microphone protects the mic capsule from water damage. The PZM11 LL WR will work during and after rainfall. If water freezes on the membrane, the mic's frequency response will change but will return to Accessories when the ice melts and the membrane dries. The PZM11 LL WR is powered by 12V - 24V DC provides line-level output and can be plugged directly into a VCR line input without the need for a costly mic preamp.
| Frequency Response (typical) | 80 Hz to 10,000 Hz |
|---|---|
| Polar Pattern | Hemispherical |
| Impedance | 75 ohms, balanced. Recommended minimum load impedance 1000 ohms |
| Open-Circuit Sensitivity, typical | 1.4 V/Pa |
| Power Sensitivity, typical | +8 dBm/Pa |
| Equivalent Noise Level (self-noise) | 26 dB SPL typical (0 dB = .0002 dyne/cm2), A-weighted |
| S/N Ratio | 68 dB at 94 dB SPL |
| Maximum SPL | 100 dB SPL produces 3% THD at maximum gain |
| Operating Voltage | 12-24V AC or DC. Phantom powering by special order as a PZM11 LL WR S1 |
| Polarity | Positive pressure on diaphragm produces positive voltage on audio terminal |
| Operating Temperature Range | –10 to +60 deg. C, 14to 140 deg. F. The mic still works at –40°. C but its sensitivity is reduced |
| Output Connector | Screw terminals labeled AUDIO +, AUDIO – and GROUND |
| Cable | None supplied. Use 2-conductor shielded mic cable and twisted-pair power cable |
| Materials | Steel plate and high-impact plastic capsule holder. Plastic membrane |
| Finish | Silver. If you paint the mic, take care not to paint inside the louvered wall plate |
| Dimensions (H x W x D) | 4.53" (115 mm) x 2.78" (70.6 mm) x 1.72" (43.69 mm) |
| Net Weight | 0.15 lbs (0.071 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.