- Description
Details
With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica's 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.
For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities.
For those using a single microphone, the single-channel 1800 Series systems include the ATW-R1810 single-channel receiver.
1800 Series wireless systems come equipped with a choice of plug-on and body-pack transmitters. The ATW-T1801 UniPak® body-pack transmitters feature a professional locking 4-pin connector compatible with all Audio-Technica Wireless Essentials® microphones. The ATW-T1802 plug-on transmitters feature a locking XLR connector for adapting dynamic and condenser microphones. Both transmitters offer selectable high and low transmission modes to conserve battery life/maximize power.
Additional 1800 Series features include automatic frequency scanning, Tone Lock™ squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control and durable metal construction.
- Features
Features
- Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)
- Compact receiver is easy to mount on a camera
- UHF reception with 996 frequencies selectable in 25 kHz steps
- Automatic frequency scanning for easy selection of open channels
- Tone Lock™ squelch system eliminates interference when transmitter is off
- Two independent balanced outputs (dual-channel systems)
- Headphone monitor output with independent level control
- Battery fuel-level indicators on transmitters and receiver
- Soft-touch controls for easy frequency selection
- True Diversity operation for resistance to multi-path interference and dropouts
- LCD frequency and battery status display with backlight
- Antenna and AF Peak LED indicators
- Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)
- Transmitters operate in low or high transmission modes to conserve battery life/maximize power
- Easy, user-friendly operation
- Clear, natural sound quality
- Powered by AA batteries
- System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably
- Specification
Overall System Operating Frequencies UHF Band C: 541.500 to 566.375 MHz Number of Operating Frequencies 996 total per band Frequency Stability ±0.005%, Phase Lock Loop frequency control Modulation Mode FM Normal Deviation ±10 kHz Operating Range 100 m (300') Typical Operating Temperature Range 23° F (-5° C) to 113° F (45° C) Frequency Response 70 Hz to 15 kHz Receiver Receiving System Dual independent RF sections, automatic-switching diversity Image Rejection >50 dB typical Signal-to-Noise Ratio 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz Total Harmonic Distortion <1% (±10 kHz deviation at 1 kHz) Sensitivity 25 dBμV, (S/N 60 dB at 5 kHz deviation, A-weighted) Audio Output (balanced) 27 mV (at 1 kHz, ±5 kHz deviation) Output Connector 3-pin mini XLR (TA3M-type) Monitor Headphone Output (typical) 35 mW max., 32 Ohm Load Monitor Headphone Jack 3.5 mm TRS, signals on both Tip and Ring External Power Requirements 12V DC nominal, 500 mA Batteries ATW-R1820: Six 1.5V AA alkaline (not included) Current Consumption Dual-channel Operation: 600 mA typical; Battery Life Dual-channel Operation (ATW-R1820): 6 hours typical* Dimensions (W x H x D) ATW-R1820: 3.35" x 5.24" x 1.42" ATW-R1810: 2.95" x 4.92" x 1.25" Net Weight ATW-R1820: 425 grams (15.0 oz) (without batteries) ATW-R1810: 300 grams (10.5 oz) (without batteries) Plug-On Transmitter RF Power Output High: 30 mW; Low: 10 mW, nominal Spurious Emissions Under federal regulations Input Connector 3-pin locking XLRF-type Batteries Two 1.5V AA alkaline (not included) Current Consumption High: 180 mA; Low: 160 mA, typical Battery Life Approximately 6 hours (High); 8 hours (Low), Dimensions (W x H x D) 1.57" x 4.37" x 1.57" Net Weight 0.43 lbs (199 g) - System Includes
System Includes
- ATW-R1810 single-channel receiver
- ATW-T1802 plug-on transmitter
- Reviews
Write Your Own Review
GET RELIABLE FREE SHIPPING* WITH CODE: FREESHIP
*Valid On Orders $199+ & Under 60lbs - Click Here For More Details
Quote 0 item
Recently added item(s) ×
You have no items in your quote.
Cart 0 item
Recently added item(s) ×
Your cart is empty.
Ordering
About Pro Acoustics
We Accept
