Skip to main content
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)
By Audio-Technica

Audio-Technica M3 Wireless In-Ear Monitor System (Discontinued)

Write a Review
Part #:
M3
Model #:
M3
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112
Email

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM 1-888-256-4112
Email Contact us by email or
our simple form. SEND EMAIL

Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences.

Description

Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR - 1/4" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

Features
  • High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
  • 1321 selectable UHF channels with automatic frequency scanning
  • Up to 16 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • LCD information display offers step-through menus for setting preferences
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when transmitter is turned off
  • Multi-level limiter (defeatable) helps protect hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix & less feedback
  • Use any number of Stereo Receivers (with individual mixes) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
  • Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

Specifications
Overall System
Minimum Frequency Step 25 kHz
Modulation Mode FM stereo
Maximum Deviation ±40 kHz
Dynamic Range 90 dB (typical), A-weighted
Total Harmonic Distortion
Operating Range 100 m (300'), typical
Operating Temperature Range -5° C (23° F) to +50° C (122° F)
Frequency Response 60 Hz to 13 kHz (+/- 3 dB)
Simultaneous Use 16 channels per band (maximum recommended)
M3T Transmitter
RF Power Output 10 mW/50 mW (switchable), 50 ohms
Limited to 10 mW within 863 MHz to 865 MHz
Input Connections XLRF-type/6.3 mm stereo (1/4") combination connector
Pin 1 and Sleeve: Ground
Pin 2 and Tip: Hot
Pin 3 and Ring: Cold
Maximum Input Level XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
6.3 mm (1/4") mono, unbalanced: +26 dBu
Loop Output Connector XLRM-type connector
Pin 1: Ground
Pin 2: Hot
Pin 3: Cold
Power Requirement 12-18V DC, 600 mA
Headphone Output Connector 6.3 mm (1/4") TRS stereo phone jack
Headphone Output Power 120 mW at 32 ohms
Antenna Connector BNC, 50 ohms
Accessories Included AC adapter (country dependant); rack mount adapters; flexible antenna
Dimensions (H x W x D) 1.7" (44 mm) x 5.2" (132 mm) x 8.3" (210 mm)
Net Weight 2.05 lbs (0.93 kg)
M3R Body-Pack Reciever
Receiving System Double conversion superheterodyne
RF Sensitivity 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
Headphone Output Connector 3.5 mm TRS stereo phone jack
Headphone Output Power 65 mW (at 32 ohms)
Antenna Input SMA-type, 50 ohms
Aux Input Connector 3.5 mm TRS stereo phone jack
Batteries 2 x 1.5V AA (not included)
Battery Life 8 hours (alkaline)
Accessories Included EP3 earphone; flexible antenna
Dimensions (H x W x D) 4.33" (110 mm) x 2.76" (70 mm) x 0.98" (25 mm)
Net Weight 0.29 lbs (0.13 kg)

DOCUMENTS

Related Products

Sold Out
Audio-Technica M2 Wireless In-Ear Monitor System (Discontinued) Audio-Technica M2 Wireless In-Ear Monitor System (Discontinued)

Audio-Technica M2 Wireless In-Ear Monitor System (Discontinued)

The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The...
$599.00

Usually arrives in 5-9 business days.

$599.00
!
My Cart