Audix ADX40 Miniature Hanging Microphone
Usually arrives in 5-9 business days.
The Audix M40 is a miniaturized condenser microphone with a fully integrated preamp designed with very high sensitivity for distance miking. It comes with a cardioid capsule, but it is also available with hypercardioid or shotgun capsules, allowing for the microphone to be used in a wide variety of applications.
The M40 is a miniaturized condenser microphone with a fully integrated preamp designed with very high sensitivity for distance miking. The primary applications for the ceiling mounted M40 include Video and Teleconferencing (VTC), distance learning, hospital rooms, surveillance and ambient room miking.
The M40 has complete immunity from RF interference caused by cell phones and GSM devices. The M40, which comes with a cardioid capsule, is also available with hypercardioid or shotgun capsules, allowing for the microphone to be used in a wide variety of applications.
The M40 is easy to install requiring only that a 5/8 inch hole be drilled in the ceiling with no additional tools required. The cable assembly is equipped with a terminal block connector. For installations where plenum rated cable is to be used a UL rated, metal plenum junction box is available.
| Transducer Type | Condenser |
|---|---|
| Frequency Response | 60 Hz - 10 kHz |
| Polar Pattern | Cardioid Hypercardioid Supercardioid |
| Output Impedance | 150 ohms |
| Sensitivity | 37 mV / Pa @ 1k |
| Signal/Noise Ratio | 72 dB |
| Equivalent Noise Level (A-Weighted) | 22 dB |
| Maximum SPL @ .5% THD | ≥130 dB |
| Dynamic Range | 108 dB |
| Power Requirements | 18 - 52 V Phantom |
| Connector | 3 pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive V on pin 2 relative to pin 3 |
| Materials / Finish | Copper and steel powder coat |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.