The DP6 is a high performance 6.5-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity and realistic sound reproduction, D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP6 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.
| Operating Range (±10 dB) | 65 Hz - 22 kHz |
|---|---|
| Frequency Response | 80 Hz - 20 kHz |
| Max Input Power Rating | 100W continuous, 250W program |
| Transformer Taps | 70V: 60W, 30W, 15W, 7.5W and low impedance 100V: 60W, 30W, 15W |
| Sensitivity (1W/1m) | 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands) 92 dB SPL (250 Hz to 4 kHz speech range) |
| Maximum Output | 114 dB SPL / 120 dB SPL (peak 8 ohm) |
| Nominal Impedance | 8 ohms |
| Nominal Coverage | 115º conical (1 kHz to 6 kHz) 125º conical (500 Hz to 6 kHz) |
| Axial Q / DI: | 4.7 / 6.7, 500 Hz to 6 kHz |
| Crossover Frequency | 1.2 kHz |
| Recommended Signal Processing | 65 Hz high pass filter |
| Drivers | LF 1 x 6.5" HF 1 x 1" exit compression driver |
| Driver Protection | Self-resetting solid state circuit breaker |
| Input Connection | Two 2-position Euroblock connectors |
| Controls | Front-face wattage / low impedance selector switch |
| Enclosure | UL 94V-0 rated ABS plastic, matte finish, paintable |
| Finish | Black or white |
| Mounting/Rigging Provisions | Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple™ brand adjustable height cable fasteners |
| Grille | Powder coated steel with safety line, black or white finish, paintable |
| Baffle | Reflex loaded UL 94V-0 rated ABS |
| Safety Features | Included safety cable. Each cable has an SWL of 99 lbs (45 kg) |
| Safety Agency Ratings | ETL listed to comply with UL1480 and CSA60065. Suspension system and Gripple™ brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81 |
| Required Accessories | Electronic high pass filter |
| Supplied Accessories | Two PHK-15 pendant hang kits Enclosure ABS plastic rear cover Rear cover ingress weather plug |
| Optional Accessories | PHK-30 30ft (9.1m) pendant hang kit PHK-50 50ft (15.2m) pendant hang kit PSC replacement Gripple™ speed clamp PST-14 trimmable 14ft (4.3m) decorative split loom tubing |
| Dimensions (H x Dia) | 14.73" (374.2 mm) x 11.22" (285 mm) |
| Weight | 11.8 lbs (5.4 kg) |
| Shipping Weight | 15.4 lbs (7 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
