- Description
Details
Biamp Desono DP8 8" Pendant Mount Loudspeaker
The DP8 is a high-performance 8-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high-power handling, higher sensitivity and realistic sound reproduction, the DP8 is the more focused big brother to the DP6. D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70/100 volt operation. Uniform voicing means that the DP8 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohms or 70/100-volt operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation.
- Features
Features
- Zoom Rooms Certified
- Stylish, contoured contemporary pendant design
- Same components and voicing as the DX ceiling and surface mount loudspeaker family
- Consistent, wide dispersion up to 16 kHz
- True coaxial loudspeakers with HF compression drivers
- Tru-Phase high-frequency waveguide
- Patented Carbon Ring Cone Technology
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonance
- Easy-access power tap switch for selectable 8 ohm or 70V/100V operation
- Integrated rear cover hiding all wires and hanging hardware
- Weather-resistant constructed with treated drivers and two-layer powder coated grilles
- ETL listed to comply with UL1480
- Available in standard black or white finishes
- 5-year warranty
- Specification
Operating Range 60 Hz - 22 kHz Frequency Response 80 Hz - 20 kHz (± 5 dB) Max Input Ratings (8 ohm) 150W continuous, 375W program
34.6 volts RMS, 69.3 volts momentary peakTransformer Taps 70V: 120W, 60W, 30W, 15W and low impedance
100V: 120W, 60W, 30WSensitivity (1W/1m) 95 dB SPL (120 Hz to 12.5 kHz 1/3 octave bands)
94 dB SPL (250 Hz to 4 kHz speech range)Maximum Output 117 dB SPL / 123 dB SPL (peak 8 ohm) Nominal Impedance 8 ohms Minimum Impedance 5.6 ohms @ 200 Hz Nominal Coverage 100º conical (1 Hz to 6 kHz)
115º conical (500 Hz to 6 kHz)Axial Q / DI 6.4 / 8, 500 Hz to 6 kHz Crossover Frequency 1.3 kHz Recommended High Pass Filter 60 Hz / 24 dB octive Drivers LF 1 x 8"
HF 1 x 1.25" exit compression driverDriver Protection Self-resetting solid state circuit breaker Input Connection Two 2-position Phoenix connectors Controls Front-face wattage / low impedance selector switch Enclosure UL 94V-0 rated ABS plastic, matte finish, paintable Finish Black or white Grille Powder coated steel with safety line, black or white finish, paintable Baffle Reflex loaded UL 94V-0 rated ABS Safety Features Included safety cable. Each cable has an SWL of 99 lbs (45 kg) Dimensions (H x Dia) 17.72" (450.1 mm) x 13.41" (340.5 mm) Weight 16.5 lbs (7.5 kg) Shipping Weight 23.2 lbs (10.5 kg) - Documents
Documents
- Reviews
Write Your Own Review




