Special Order (Return conditions apply)
Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.The flagship model Desono DX-IC10 exceeds the performance of competing "high-ceiling" models. The DX-IC10 provides high-level foreground music, loud-and-clear paging (even in noisy environments), and readily supports large systems in sports facilities, clubs, or concert venues for delay and zone fill. Compact, affordable replacement for typical 12" competitor ceiling speakers.
DX-IC10s can readily be combined with smaller members of the Desono DX family due to Biamp's uniform voicing technology, providing additional power and LF response in areas that require it. Featuring genuine coaxial design with separate magnets for the LF and HF drivers, the DX-IC10 exhibits reduced distortion and industry-leading sensitivity permitting 3 dB to 6 dB greater output level, while requiring half the amplification power of competing products.
Patent-pending SpringLock™ clamps allow singlehanded placement to speed installation and reduce labor time. The SpringLock spring-loaded clamps support the back can on the included tile rails and snap-on C-ring, so that the installer no longer needs to hold the can against the tile while tightening the clamps.
The front-face wattage selector switch enables quick adjustment of tap levels, while the high power internal autoformer permits full power output with 70V or 100V lines. A variety of installation accessories are available to accommodate different ceiling materials.
| Operating Mode | Passive with DSP |
|---|---|
| Operating Environment | Indoor |
| Operating Range (-10dB) | 58 Hz to 22 kHz |
| Nominal Beamwidth (H x V) | 90°, conical |
| Transducers | LF 1 x 10" (254 mm) HF 1 x 1.25" (32 mm) exit compression driver |
| Nominal Maximum SPL | Peak 127 dB Continuous 121 dB |
| Autoformer | 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W |
| Recommended Amplifiers | 200 W - 400W @ 8 Ω, (40 V - 57 V) |
| Input Connection | 4-position Euroblock connector |
| Controls | Front-face wattage / low impedance selector switch |
| Mounting Provisions | 4 SpringLock mounting clamps with 3-inch grip range |
| Certifications | ETL listed to comply with UL1480, UL2043 and CSA62368-1 Suitable for use in air handling spaces per NFPA 70 and NFPA 90 |
| Included Accessories | C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template |
| Cutout Diameter | 14.17" (360 mm) |
| Dimensions (Dia x D) | 15.51" (394 mm) x 10.37" (263 mm) |
| Weight | TBD |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
