- Description
Details
The ControlSpace ESP-00 Series II engineered sound processor offers high-quality signal processing through a flexible audio platform. Install up to eight analog and/or digital audio expansion cards to create customized audio systems. Onboard connectivity includes Ethernet, RS-232, expandable GPIO, and support for elegant Bose® control centers and volume controls.
Flexible I/O through a customizable card-frame design. With a powerful DSP core, the ESP-00 Series II processor accommodates up to 64 channels of audio over 8 open card slots, and general purpose I/O (GPIO) expansion up to 16 control inputs and 16 control outputs
High-quality open-architecture DSP supports 48 kHz sample rate/24-bit conversion, uses a floating-point DSP and operates at low latencies for sound system precision I/O expansion cards cover a number of audio channel requirements from mic/line analog to Dante™ networking. These cards offer different audio options to populate the 8 open card slots.
Support for popular network protocols – Allowing integrators more flexibility in selection, the ControlSpace ESP-00 II processor supports popular audio networking protocols Dante™ and CobraNet® for interconnection with other products and audio systems.
A large suite of signal processing algorithms is available. These include automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGC’s, duckers, gates, compressors, source selectors and delays.
A variety of control options. The ControlSpace ESP-00 II processor is compatible with five user control interface options and can integrate with industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports.
ControlSpace® Designer™ software is used to configure both the signal processing and control capabilities of ControlSpace ESP processors. With ControlSpace Designer™ software it is possible to design, configure, control and monitor all Bose® networked system electronics from a single software application.
- Features
Features
- Flexible I/O through a customizable card-frame design
- High-quality open-architecture DSP
- I/O Expansion Cards
- Support for popular network protocols
- A large suite of signal processing algorithms
- A variety of control options.
- ControlSpace® Designer™ software
- Specification
Integrated DSP Signal Processor Four 32-Bit Floating-Point Digital Signal Processors, 200 MHz Maximum Calculation 6.4 GIPS / 4.8 GFLOPS Delay 288 s Audio Latency 860 μs (Analog in to Analog Out) A/D and D/A Converters 24-Bit Sample Rate 48 kHz Control Inputs Inputs (Control) 8 Analog or Digital Inputs, 5.1 kΩ Internal Pull-Up Resistor to 5 V, 3.81 mm Euroblock, 9-Pin Analog Input Voltage Range 0 V to 3.3 V (Maximum 5 V) Digital Input Voltage Range 0 V to 3.3 V (Threshold Voltage = 1.6 V) Control Outputs Outputs (Control) 8 Digital Outputs, 3.81 mm Euroblock, 9-Pin Output Voltage High: 7.5 V (Open Circuit), 2.5 V @ 10 mA, Low: < 1 V @ 100 mA, Push-Pull Indicators and Controls LED Status Indicators Power, Status, Ethernet/Serial (RS-232 + CC-16) Audio Signal Indication Green (-60 to -20 dBFS), Yellow (-20 to -2 dBFS), Red (-2 to 0 dBFS) Electrical Specifications Mains Voltage 85 VAC-264 VAC 50/60 Hz with PFC AC Power Consumption < 35 VA Typical / < 70 VA Max at < 95°F (35°C) Ambient Mains Connector IEC 60320-C14 (Inlet) Power Dissipation 70 W (239 BTU, 60 kcal) General PC Configuration Software ControlSpace® Designer™ Software Network Control Ethernet (RJ-45), 10 Mb Communications Ports RS-232 (DB9M, DTE), Bose CC-16 (5.08 mm Euroblock 3-Pin) Expansion Slots 8 Analog/Digital Audio, 2 GPIO (1 Occupied) Audio Channel Capacity 64 (Bi-Directional, Digital and/or Analog) Physical Operating Temperature 32 °F - 104 °F (0 °C - 40 °C) Cooling System Internal Fan Dimensions (H x W x D) 3.5" (88.9 mm) x 19" (482.6 mm) x 13" (330.2 mm) Net Weight 10.8 lbs (4.9 kg) - Documents
- Reviews
Write Your Own Review