- Description
Details
Bose DesignMax DM6PE IP55 Rated Outdoor Pendant-Mount Hanging Speaker
With a coaxial two-way design, the 125-watt DesignMax DM6PE loudspeaker offers rich lows and clear, intelligible highs — along with premium aesthetics that complement any commercial sound installation. The DM6PE pendant loudspeaker features a coaxial 6.5-inch woofer and a 1.25-inch tweeter mounted within the Dispersion Alignment system, and delivers a frequency range of 62 Hz – 20 kHz. The DM6PE is IP55 outdoor-rated and features a recessed single-point suspension system for a sleek, attractive appearance. All models are available in black or white.
- Features
Features
- Complete any commercial sound installation with 16 DesignMax loudspeakers to mix and match, including in-ceiling, surface-mount, and pendant form factors, subwoofers, high-SPL compression-driver models, compact low-profile models, and outdoor-rated options
- Choose from three DM6 models — the in-ceiling DM6C, the surface-mounted and outdoor-rated DM6SE, and the sleek, outdoor-rated DM6PE pendant loudspeaker
- Deliver rich lows and clear, intelligible highs with a coaxial two-way design — no DSP or EQ required. For even better sound, use select Bose DSPs and amplifiers to enable Bose loudspeaker EQ and SmartBass processing, which expands performance and response at any listening level
- Ensure a consistent listening experience throughout the room with the Dispersion Alignment system, which matches the acoustic pattern of the woofer to the pattern of the tweeter
- Blend with any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos
- Install easily with industry-standard accessories — all models include Euroblock connectors; in-ceiling models include plenum-rated backcans, tile bridges, and front-access audio wiring that makes installation and troubleshooting easier
- Install DM6PE outside — IP55 rating with powder-coated steel grille for outdoor use
- Provide an open, attractive aesthetic with pendant loudspeakers featuring a recessed single-point suspension system that keeps hardware out of sight and can be used to hold and hide a service loop for easy access
- Specification
Frequency Response (-3 dB) 75 – 20,000 Hz Frequency Range (-10 dB) 62 – 20,000 Hz Nominal Coverage Angle (1 – 4 kHz) 115° conical Nominal Coverage Angle (1 – 10 kHz) 115° conical Power Handling, Long-Term Continuous Bose extended-life cycle test: 100W
AES transducer test: 125WPower Handling, Peak Bose extended-life cycle test: 400W
AES transducer test: 500WSensitivity (SPL/1W @ 1 m) Bose extended-life cycle test: 89 dB
AES transducer test: 89 dBCalculated Maximum SPL @ 1 m Bose extended-life cycle test: 109 dB
AES transducer test: 110 dBCalculated Maximum SPL @ 1 m, Peak Bose extended-life cycle test: 115 dB
AES transducer test: 116 dBLoudspeaker EQ Not required, Bose EQ voicing, and SmartBass processing available Recommended High-Pass Protection 65 Hz with minimum 24 dB/octave filter Transformer Taps 70V: 2.5, 5, 10, 20, 40, 80W, bypass
100V: 5, 10, 20, 40, 80W, bypassDrivers Low Frequency: 1 x 6.5-inch woofer (165 mm)
High Frequency: 1 x 1.25-inch (32 mm) neodymium dome tweeter, coaxially mounted, weather-treatedNominal Impedance 8Ω (transformer bypass) Enclosure Material Engineered plastics, highly UV fade-resistant Grille Perforated steel, powder-coated finish Logo Rotatable, removable Color White: Bose Arctic White, similar to RAL 9003, paintable Environmental Outdoor per IEC 529 IP55 (suitable for use outdoors in wet locations), weather-resistant input cover Safety Agency UL-1480A, S5591/UL Listed, NFPA70 & NFPA90-A, CE compliant, UL 2239 for suspension cable Operating Temperature Range –25 °C to 65 °C (–13 °F to 149 °F) Connectors Euroblock 6-pin connector with loop-through, mounted on top. Accepts 18 AWG (0.8 mm2) to 14 AWG (2.5 mm2) size wire. Includes input cover-pin connector with loop-through, mounted on top. Accepts 18 AWG (0.8 mm2) to 14 AWG (2.5 mm2) size wire Suspension/Mounting Each DM6PE has one (1) suspension attachment point and one (1) safety cable attachment point. Included is one (1) 4.5 meter (15 foot) Gripple adjustable suspension cable Optional Accessories Threaded Rod Adapter, Conduit Adapter, Gripple Pendant Suspension Cable Pair kit Dimensions (Enclosure Dia x D) 12.1" (308 mm) x 14.8" (375 mm) Net Weight 12.5 lbs (5.7 kg) Shipping Weight (Pair) 33.09 lbs (15.01 kg) - Documents
Documents
- Reviews
Write Your Own Review