AtlasIED

The DPA-102 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. This amplifier can be used right out of the box as traditional power amplifiers requiring...

The Atlas Power ECM-30 is an Electrical Control Module (ECM) 30A Power Conditioner and AC Spike Suppressor that is designed to be used as a stand-alone unit or in conjunction with an ECS-6RM Controller up to 1000ft away. The ECM-30 features electrical...

The Atlas Power ECM-2063 AC Power Distribution Sequencer Raceway System is designed to offer the installer/contractor current requirement flexibility based on the needs of the equipment that will be connected to the raceway. The ECM-2063 accepts up to...

The Atlas Sound TSD-SEQ6 Sequencer Controller features 6 outputs that are configurable individually to be either a 24VDC output or Hard Switch Contact Closure (CC). There are two separate output sequence time delay trimmers ranging from 1 second to 10...

The AWR3W-HR 3RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. The AWR3W-HR is designed to install within standard 16" stud wall construction, reducing...

The Atlas Sound AWR2W-HR 2RU Tilt Out Half Rack Wall Cabinet offers convenient access, lock-in security, and welded construction that can be surface or recessed mounted. It is designed to install within standard 16" stud wall construction, reducing...

This Atlas Sound Patent pending accessory kit that converts the DT12 and IDT12 (-CK) into a 2'x2' lay in speaker. The DT12-2X2ADP includes two filler panels that allow the DT12 or IDT12 (-CK) to be incorporated into the center of a 2' x 2' ceiling tile...

AtlasIED FD70W 8-Inch In-Ceiling Speaker Assembly The FD70W is a cost-effective in-ceiling speaker assembly designed for commercial paging and background music applications. This all-in-one solution includes a high-quality 8" treated paper cone...

AtlasIED M1000R-W Round 8" Sound Masking Speaker – UL1480 & UL2043 Listed The M1000R-W is a perfect solution for contemporary office spaces with open ceiling designs where sound masking is used to enhance speech privacy. The sleek round design...

AtlasIED FA62T-8MB 6-Inch Loudspeaker Board Assembly The FA62T-8MB is the entire 6" speaker, transformer, selector switch, and front plate assembly found in the FAP62T assembly. The footprint of the FA62T-8MB is identical to a standard FA series 8"...

The Atlas SMBALLMOUNT Tilt Mounting Bracket for SM42T is a unique wall mount bracket for the SM42T which allows pan and tilt adjustment of the loudspeaker.

The 510-4 4 inch Cylindrical Bidirectional Baffle Enclosures are identical to the 410 series with the addition of a circular mounting canopy complete with mounting hardware and second grille to enable bi-directional sound dispersion. The 510-4 mounts a...

AtlasIED MLE-3T Explosion Proof Compression Driver MLE-3T speakers are explosion proof compression driver / horn assembly components designed for use in hazardous areas of high efficiency voice communications and electronic signals. Driver protection...

The Atlas Sound SIR Surface Indoor Enclosure is a back box for SVT Series models and it mounts to any single or double-gang backbox for concealed conduit applications. CRS unit includes 0.5" conduit knockouts (three on each side; five on rear) with...

The SIN is a surface-mounting indoor back box for SVT Series models mounts to any single or double-gang back box for concealed conduit applications. CRS unit includes 0.5" conduit knockouts (three on each side; five on rear) and the Epoxy-finished...

Surface-mounting SER exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 0.5" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a red durable epoxy

Surface-mounting exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 1/2" conduit and includes a weatherproof gasket. Housing is die-cast zinc finished in a durable Neutral Gray epoxy.

The 81-8S 8" square hole T-Bar bridge is designed to mount 8" loudspeakers. It has a square cut-out with a multi-position hole pattern to accommodate an extensive variety of round and square baffles including torsion spring and screw mount models. The...

The FA81-4 4" tile bridge for Strategy Speakers is designed for use with 4" loudspeakers to prevent ceiling tile sag by distributing the loudspeaker assembly weight to the ceiling's support members. The FA81-4 accepts enclosure model series FA95-4,...

The Atlas Sound CX188329 is a bracket which allows the HT167 transformer to be mounted to the back of the C803 speaker.