More Views

Community D10 10" 2-Way Ceiling Loudspeakers - Pair
Part # D10
Model # D10

The Community D10 exceeds the performance of competing "high-ceiling" models and provides high-level foreground music, loud-and-clear paging and readily supports large systems in sports facilities, clubs, or concert venues for delay and zone fill.

Availability: Usually arrives in 12-16 business days

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

The flagship model of the D SERIES, the D10 exceeds the performance of competing “high-ceiling” models. The D10 provides high-level foreground music, loud-and-clear paging (even in noisy environments), and readily supports large systems in sports facilities, clubs, or concert venues for delay and zone fill. Characterized by powerful, musical performance and superb speech intelligibility, the D10 represents a significant change in the ceiling speaker market segment.

D10’s can readily be combined with smaller members of the Distributed Design family due to Community’s uniform voicing technology, providing additional power and LF response in areas that require it. True coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity permitting 3 dB to 6 dB greater output level, while requiring half the amplification power of competing products.

The proprietary Tru-Phase™ waveguide and perfectly centered driver produce a consistently wide conical polar response up to 16 kHz. Community’s patented Carbon Ring Cone Technology™ increases the effective cone area to further reduce distortion while reinforcing the cone for improved durability.

Exclusive Drop-Stop™ and Twist-Assist™ tabs allow single-handed placement to speed installation and reduce labor time. Drop-Stop’s spring-loaded legs support the back can on the included tile rails and snap-on C-ring, so that the installer no longer needs to hold the can against the tile while tightening the clamps. Twist-Assist performs a similar function for the baffle assembly: when the loudspeaker back cans are pre-installed into a conduit system for termination at a later date, a simple twist of the baffle into the back can brings the Twist-Assist clips together, supporting the baffle assembly while the installer fastens the screws.

The front-face wattage selector switch enables quick adjustment of levels, while the high-power internal autoformer permits full power output with 70V or 100V lines. A variety of installation accessories are available to accommodate different ceiling materials. The D10 face-only assembly and back can are also available for  separate purchase.

Features

Features

  • High intelligibility with exceptional uniform coverage
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase™ high-frequency waveguide
  • Patented Carbon Ring Cone Technology™
  • Spring loaded Drop-Stop™ installation assistant tabs support the back can on the included rails and C-ring to simplify installation
  • Uniquely designed tile bridge support rails and snap-on C-ring support plates prevent sag
  • Twist-Assist™ loudspeaker face retainer tabs for fast and easy installation
  • 3/4" and 1" knock-outs on the sides of the back can
  • External loop-through Euroblock connectors
  • Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
  • Selectable 8 ohm or 70V/100V operation
  • Back can and face-only packages available
  • Five year warranty
Specification
Operating Range58 Hz - 22 kHz
Frequency Response75 Hz - 20 kHz (±5 dB)
Max Input Ratings (8 ohm)200W continuous, 500W program; 40 volts RMS, 89 volts momentary peak
Transformer Taps - 70V200W, 100W, 50W, 25W and low impedance
Transformer Taps - 100V200W, 100W, 50W
Distortion—10% Full Power
500 Hz2nd Harmonic 0.92%; 3rd Harmonic 0.88%
2 kHz2nd Harmonic 0.81%; 3rd Harmonic 0.30%
8 kHz2nd Harmonic 2.9%; 3rd Harmonic 0.04%
1% Full Power
500 Hz2nd Harmonic 0.17%; 3rd Harmonic 0.71%
2 kHz2nd Harmonic 0.07%; 3rd Harmonic 0.16%
8 kHz2nd Harmonic 1.04%; 3rd Harmonic 0.01%
Sensitivity (1W/1m)98 dB SPL (100 Hz to 12.5 kHz 1/3 octave bands); 121 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output121 dB SPL / 127 dB SPL (peak 8 ohm)
Nominal Impedance8 ohms
Minimum Impedance6.6 ohms @ 190 Hz
Nominal Coverage88º conical (1 Hz to 6 kHz); 100º conical (500 Hz to 6 kHz)
Axial Q / DI6.5 / 8.1, 500 Hz to 6 kHz
Crossover Frequency1 kHz
Recommended Signal Processing58 Hz high pass filter
DriversLF 1 x 10" HF 1 x 1.25" exit compression driver
Driver ProtectionSelf-resetting solid state circuit breaker
Input Connection4-position Phoenix connector
ControlsFront-face wattage / low impedance selector switch
EnclosureCorrosion-resistant zinc plated steel
Mounting/Rigging Provisions4 steel mounting clamps with 3-inch grip range
GrillePowder coated steel with safety line, white finish, paintable
BaffleReflex loaded UL 94V-0 rated ABS
Safety Features4 x safety hang points
Safety Agency RatingsETL listed to comply with UL1480, UL2043 and CSA60065. Suitable for use in air handling
Face-Only / Back Can OptionsD10-FO Face-Only Assembly D10-BC Back Can
Required AccessoriesElectronic high pass filter
Supplied AccessoriesC-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template
Optional AccessoriesD10-NCB New Construction Bracket
Cutout Diameter14.125" (359 mm)
Dimensions (Dia x D)14.96" (380 mm) x 9.98" (253.4 mm)
Net Weight23.1 lbs (10.5 kg)
Shipping Weight (Pair)60 lbs (27.2 kg)
Documents

Documents

Videos

Videos

Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Community D10 10" 2-Way Ceiling Loudspeakers - Pair