- Description
Details
Community R2-94MAX 3-Way High Output 90° x 40° Weather Resistant Loudspeaker
The R2-94MAX is a three-way, full-range loudspeaker system designed to provide "No Compromises" premium music reproduction at very high output levels, and also improves the legendary R2 voice projection and intelligibility capabilities. It is designed with the same materials and construction as the standard R2 for extreme weather resistance, and can withstand long-term exposure to tough environmental conditions.
The R2-MAX is constructed with premium components in a biamp format to maximally optimize its performance. It uses a 1.4" exit HF compression driver that features a copper shorting ring and hybrid diaphragm to reduce resonances while maintaining excellent HF extension. Operated with a high crossover frequency, the large HF driver maintains very high headroom, delivering effortless performance. The dual, high power 12" LF drivers feature an aluminum demodulation ring for very clean, low distortion performance. The midrange features a higher performance version of the legendary low compression ratio M200 2" exit compression driver, achieving 3dB greater output with extremely low distortion. The passive MF/HF horn signal aligns the drivers for the best possible music and speech performance. The result is an excellent loudspeaker system that is capable of exceeding expectations in any application.
- Features
Features
- Modern stadium loudspeaker, designed to meet the needs of today's sporting venues for superb musicality, excellent speech intelligibility and very high output
- Signal aligned passive MF/HF horn coaxially mounted in front of electronically signal aligned LF drivers
- Large format 1.4" exit HF, high output M200HP, and premium high output LF drivers
- High sensitivity and very high output (134 dB max), with flat extended frequency response
- Specification
Transducers LF 2x12" inherently weather-resistant cones w/3" voice coil, neodymium motor & aluminum demodulation ring MF 1 x 2" exit, M200HP compression, 3.5" diaphragm, 2.2" Voice coil, high temp non-metallic diaphragm HF 1 x 1.4" exit compression, 2.87" voice coil, copper shorting ring, titanium diaphragm w/mylar surround Operating Mode Biamp Operating Range 70 Hz to 22 kHz (-10 dB) Frequency Response 85 Hz to 20 kHz (-3 dB) Nominal Beamwidth (-6 dB) 90° x 40°, 1.6 kHz to 10 kHz Axial Q / DI 14.75/11.69, 1.6 kHz to 10 kHz Maximum Output without EQ3: 132 dB (137 dB Peak), with EQ4: 131 dB (136 dB Peak) Operating Mode Biamp (Passive MF/HF) Recommended Processing DSP with CONEQ™ power response correction Transducer Performance Maximum Input Ratings LF: 1200W Continuous (98V) / 4800W Peak (196V)
MF/HF: 150W Continuous (35V) / 300W Peak (70V)Sensitivity LF: 103 dB (100 Hz - 500 Hz)
MF/HF: 107 dB (400 Hz - 18 kHz)Nominal Impedance LF: 8 ohms, (9.3 ohms @ 250 Hz minimum)
MF/HF: 8 ohms, (5.6 ohms @ 5 kHz minimum)Input Connection 2 x 12' (3.6 m) 16-2 SJOW cables Enclosure Hand-laminated multilayer fiberglass Finish Paintable, light grey gel-coat (RAL #7038) Mounting/RiggingProvisions (5) 1/2"-13 threaded rigging points, Steel zinc-rich epoxy dual-layer powder-coated bracket with (2) aluminum aiming straps to secure angle Grille 3-layer Weather-Stop™ with polyester mesh, foam, zinc-rich epoxy dual-layer powder-coated perforated steel color-matched to enclosure Environmental IEC529 IP55W rating with a minimum 5° down-tilt Dimensions (H x W x D) 24.75" (629 mm) x 24.75" (629 mm) x 30.75" (781 mm) Weight 92 lbs (42.2 kg) loudspeaker only
115 lbs (52.2 kg) with yoke bracketShipping Weight 125 lbs (56.7 kg) - Documents
Documents
- Reviews
Write Your Own Review