Community R2-66MAX 3-Way High Output 60° x 60° Weather Resistant Loudspeaker
The R2-66MAX is a three-way, full-range loudspeaker system designed to provide "No Compromises" premium music reproduction at very high output levels, and also improves the legendary R2 voice projection and intelligibility capabilities. It is designed with the same materials and construction as the standard R2 for extreme weather resistance, and can withstand long-term exposure to tough environmental conditions.
The R2-MAX is constructed with premium components in a biamp format to maximally optimize its performance. It uses a 1.4" exit HF compression driver that features a copper shorting ring and hybrid diaphragm to reduce resonances while maintaining excellent HF extension. Operated with a high crossover frequency, the large HF driver maintains very high headroom, delivering effortless performance. The dual, high power 12" LF drivers feature an aluminum demodulation ring for very clean, low distortion performance. The midrange features a higher performance version of the legendary low compression ratio M200 2" exit compression driver, achieving 3dB greater output with extremely low distortion. The passive MF/HF horn signal aligns the drivers for the best possible music and speech performance. The result is an excellent loudspeaker system that is capable of exceeding expectations in any application.
| LF | 2 x 12" inherently weather-resistant cones w/3" voice coil, neodymium motor & aluminum demodulation ring |
|---|---|
| MF | 1 x 2" exit, M200HP compression, 3.5" diaphragm, 2.2" Voice coil, high temp non-metallic diaphragm |
| HF | 1 x 1.4" exit compression, 2.87" voice coil, copper shorting ring, titanium diaphragm w/ mylar surround |
| Operating Mode | Biamp |
| Operating Range | 70 Hz to 22 kHz (-10 dB) |
| Frequency Response | 85 Hz to 20 kHz (-3 dB) |
| Nominal Beamwidth (-6 dB) | 60° x 60°, 1.6 kHz to 10 kHz |
| Axial Q / DI | 17.13/12.34, 1.6 kHz to 10 kHz |
| Maximum Output | without EQ3: 133 dB (139 dB Peak), with EQ4: 132 dB (137 dB Peak) |
| Operating Mode | Biamp (Passive MF/HF) |
| Recommended Processing | DSP with CONEQ™ power response correction |
| Maximum Input Ratings | LF: 1200W Continuous (98V) / 4800W Peak (196V) MF/HF: 150W Continuous (35V) / 300W Peak (70V) |
| Sensitivity | LF: 103 dB (100 Hz - 500 Hz) MF/HF: 108 dB (400 Hz - 18 kHz) |
| Nominal Impedance | LF: 8 ohms, (9.3 ohms @ 250 Hz minimum) MF/HF: 8 ohms, (5.6 ohms @ 5 kHz minimum) |
| Input Connection | 2 x 12' (3.6 m) 16-2 SJOW cables |
| Enclosure | Hand-laminated multilayer fiberglass |
| Finish | Paintable, light grey gel-coat (RAL #7038) |
| Mounting/RiggingProvisions | (5) 1/2"-13 threaded rigging points, Steel zinc-rich epoxy dual-layer powder-coated bracket with (2) aluminum aiming straps to secure angle |
| Grille | 3-layer Weather-Stop™ with polyester mesh, foam, zinc-rich epoxy dual-layer powder-coated perforated steel color-matched to enclosure |
| Environmental | IEC529 IP55W rating with a minimum 5° down-tilt |
| Dimensions (H x W x D) | 24.75" (629 mm) x 24.75" (629 mm) x 30.75" (781 mm) |
| Weight | 92 lbs (42.2 kg) loudspeaker only 115 lbs (52.2 kg) loudspeaker and yoke |
| Shipping Weight | 125 lbs (56.7 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
