- Description
Details
Community D5 5" 2-Way Ceiling Speakers
The D5 has a more focused dispersion, higher sensitivity and output than the smaller D4. The high performance D5 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.
The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model is available as a complete assembly, including everything needed for standard installations, and can also be ordered as separate faces and back cans. The model has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.- Features
Features
- High intelligibility with exceptional uniform coverage
- Consistent, wide dispersion up to 16 kHz
- True coaxial loudspeakers with HF compression drivers
- Tru-Phase™ high-frequency waveguide
- Patented Carbon Ring Cone Technology™
- Spring loaded Drop-Stop™ installation assistant tabs support the back can on the included rails and C-ring to simplify installation
- Uniquely designed tile bridge support rails and snap-on C-ring support plates prevent sag
- Twist-Assist™ loudspeaker face retainer tabs for fast and easy installation
- 3/4" and 1" knock-outs on the sides of the back can
- External loop-through Euroblock connectors
- Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
- Selectable 8 ohm or 70V/100V operation
- Back can and face-only packages available
- Five year warranty
- Specification
Operating Range 65 Hz - 22 kHz Frequency Response 80 Hz - 20 kHz (±5 dB) Max Input Ratings (8 ohm) 100W continuous, 250W program
28 volts RMS, 63 volts momentary peakSensitivity (1W/1m) 93 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
91 dB SPL (250 Hz to 4 kHz speech range)Maximum Output 113 dB SPL / 119 dB SPL (peak 8 ohm) Nominal Impedance 8 ohms Axial Q / DI 4.5 / 6.5, 500 Hz to 6 kHz Crossover Frequency 1.6 kHz Drivers LF 1 x 5"
HF 1 x 1" exit compression driverDriver Protection Self-resetting solid state circuit breaker Input Connection 4-position Euroblock connector Controls Front-face wattage / low impedance selector switch Enclosure Corrosion-resistant zinc plated steel Mounting/Rigging Provisions 4 steel mounting clamps with 3-inch grip range Grille Powder coated steel with safety line, white finish, paintable Baffle Reflex loaded UL 94V-0 rated ABS Safety Features 4 x safety hang points Safety Agency Ratings ETL listed to comply with UL1480, UL2043 and CSA60065. Suitable for use in air handling spaces per NFPA 70 and NFPA 90 Required Accessories Electronic high pass filter Supplied Accessories C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver Optional Accessories D45-FAR Face Adapter Ring
D45-CATR Can Adapter Ring / Trim Ring
D45-NCB New Construction BracketCutout Diameter 8.75" (222 mm) Dimensions (Dia x D) 9.53" (242 mm) x 6.83" (173.4 mm) Net Weight 10.4 lbs (4.7 kg) Shipping Weight (Pair) 29.6 lbs (13.4 kg) - Documents
Documents
- Reviews
Write Your Own Review