Search results for 'dante'
-
Atlas Sound IPCSDTOUCH-G Touch Screen Dante Digital Communication Station with Gooseneck Microphone
The Atlas IPCSDTOUCH-G digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.
List $6,885.99Price $5,510.99Savings $1,375.00 (20%) -
Atlas Sound IPCSDTOUCH-H Touch Screen Dante Digital Communication Station with Handheld Microphone
The Atlas Sound IPCSDTOUCH-H digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.
List $6,885.99Price $5,510.99Savings $1,375.00 (20%) -
Listen Tech LW-150P-02-D Listen Everywhere 2-Channel Wi-Fi Audio Server with Dante
The Listen Everywhere LW-150P is an affordable way to deliver 2 DanteĀ® audio channels to audiences of up to 1000 users. The rear panel Dante input allows for easy audio routing and management via Dante ControllerĀ® software. -
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
SoundTube IPD-SM82-EZ-II 8" IP-Addressable Dante-Enabled Surface Mount Speaker - White
The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.
-
SoundTube IPD-SM82-EZ-II 8" IP-Addressable Dante-Enabled Surface Mount Speaker - Black
The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Atlas Sound DA-PM8GD-B 8" Pendant Mount PoE Dante Speaker System - Black
The AtlasIED DA-PM8GD is an 8" indoor pendant mount IP PoE amplified loudspeaker featuring Audinateās Dante digital audio transport platform. The DA-PM8GD supports a 8" efficient speaker design with a sensitivity of 98dB 1W/1m and a maximum output of 109dB. -
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
ProCo AODDP-4XF 4-Input Dante Wall Plate
The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-2XF2XM 2-Input + 2-Output Dante Wall Plate
The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-4XM 4-Output Dante Wall Plate
The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
Audix M55WD Hanging Ceiling Microphone with Adjustable Height for Dante AES67 Integrated Microphone Systems
The Audix M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.
-
Audix M70WD Flush Mount Ceiling Microphone for Dante AES67 Integrated Microphone Systems
The Audix M70WD is a steerable, flush-mount condenser microphone designed for distance miking in a variety of applications, including video conferencing, distance learning, hospital rooms, surveillance, and ambient room miking.
-
Shure SCM820-DAN 8-Channel Digital IntelliMix Automatic Mixer with Dante
The Shure SCM820-DAN is an 8-channel digital automatic mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
-
Audio-Technica ATND933aH Hypercardioid Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.
List $629.99Price $629.00 -
Audio-Technica ATND933aWH Hypercardioid Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aWH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.
List $629.99Price $629.00 -
Audio-Technica ATND933aWC Cardioid Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aWC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its low profile and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.
List $629.99Price $629.00 -
Audio-Technica ATND933aML MicroLine Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aML is a wide-range miniature condenser microphone with a MicroLine® (line cardioid) polar pattern. It is designed for quality sound reinforcement. The combination of small size and excellent response makes the microphone ideal for suspension over choirs, instrumental groups or theater stages.
List $699.99Price $699.00 -
Audio-Technica ATND933aWML MicroLine Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aWML is a wide-range miniature condenser microphone with a MicroLine® (line cardioid) polar pattern. It is designed for quality sound reinforcement. The combination of small size and excellent response makes the microphone ideal for suspension over choirs, instrumental groups or theater stages.
List $699.99Price $699.00 -
Atlas Sound IPCSD4 4-Button Digital Microphone Station with Dante Message Channels
The AtlasIED IPCSD4 digital microphone station is a 4-button device for initiating audio/visual announcements, messages, and pages with the GLOBALCOMĀ®.IP IP108-D or IP116-D Announcement Control Systems. The IPCSD4 uses a single Ethernet interface for audio and control data.
List $1,906.99Price $1,528.99Savings $378.00 (20%) -
Atlas Sound IPUSBD-16 Dante 16 x 16 USB Input/Output Network Audio Device
The Atlas Sound IPUSBD-16 is a Dante™ network audio device that provides 16x16 input/output channels of digital audio to/from a USB port of a host computer to Ethernet.
List $2,685.99Price $2,150.99Savings $535.00 (20%) -
Audio-Technica ATND971a Cardioid Condenser Boundary Microphone with Dante Network Output
The Audio-Technica ATND971a has bridged the gap between audio and IT with the first wired microphone that transmits audio and controls data together over the Dante network protocol. A simple Ethernet connection allows the network microphone to communicate across an existing network of Dante-enabled devices and, with the mic's integrated, programmable user switch, control any of those devices at the push of a button.
List $629.99Price $629.00