Search results for 'volume control'
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Atlas Sound DA-APX PoE+ Dante Outdoor Weather Resistant Horn Speaker
The AtlasIED DA-APX is a weather resistant IP PoE amplified constant directivity high-output horn featuring Audinate’s Dante digital audio transport platform. The DA-APX features a 60° x 40° constant-dispersion pattern across the controlled frequency band of 1.25-10 kHz. -
Cambridge Qt X 800D 8 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 800D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Yamaha SWP1-16MMF Audio Network Switch
A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%) -
Cambridge Qt X 300D 3 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 300D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. The Qt X 300D controls up to three zones of Qt standard or active emitters. -
Cambridge Qt X 805D 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and Dante Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Cambridge Qt X 600D 6 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 600D control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Audio-Technica ATUC-IRCUDAN Infrared Control Unit with Dante for Wired or Wireless Digital Discussion Systems
The Audio-Technica ATUC-IRCUDAN rack-mountable infrared control unit includes all of the features of the ATUC-IRCU, plus Dante™ output with redundancy and drives wireless or wired-wireless hybrid systems. It can power and control a total of 200 ATUC-IRDU infrared discussion units and 100 ATUC-50DU/IU/INT wired units.
-
Bose ControlSpace EX-UH Dante Under-Table Endpoint with USB
Optimized for use with the EX-1280C, the Bose EX-UH Dante endpoint, is a convenient, cost effective solution for connecting remote BYOD devices or telephone handsets over a single cat-5/6 cable.
-
Bose ControlSpace EX-8ML Dante Under-Table Endpoint with 8 Mic Inputs
Optimized for use with the EX-1280C, the Bose EX-8ML Dante endpoint, is a convenient, cost effective solution for connecting up to 8 conferencing microphones over a single cat-5/6 cable.
-
Atlas Sound DPA602 600W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
-
Atlas Sound DPA1202 1200W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Atlas Sound DPA2402 2400W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.