Search results for 'Crown CDi series'

The Atlas Sound FA-TR4 4 inch New Construction Ring is a Strategy Series trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-4 or FA95-4 enclosure.

The Atlas Sound FA-TR6 6 inch New Construction Ring is a Strategy Series FA-TR6 trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-6 or FA95-6 enclosure or FAPR-6 plaster ring.

The Atlas Sound FA-TR8 8 inch New Construction Ring for the Strategy Series is a trim ring/rough-in bracket, for wall or ceiling-mount applications. It installs prior to the drywall and serves as a pattern cut-out for the drywall contractor to finish out the wall leaving the proper opening for a FA97-8 or FA95-8 enclosure.

Universal mounting bracket for all EX series Dante endpoints.

The JBL ceiling MTC-28/25CM mount adapter allows Control Contractor Series loudspeakers to be installed hanging down from a ceiling or beam. The adapter does not come with a base and requires the use of your existing Invisiball base (which comes with your loudspeaker).

The LM1-TB Tile Bridge and C-Ring for LC1 (2 Pieces) from Bosch allows you to install an LC1 series ceiling loudspeaker in a drop-in tile ceiling. The bridge consists of 2 rails and spreads the weight of the speaker for safe installation.

The RDL D Series-J3 is a complete audio input panel assembly and may be mounted directly into cabinets or most standard US single gang electrical boxes.

The AtlasIED FS-PMBRKT is a bracket designed to enable an FS Series horn loudspeaker to be mounted to a tripod loudspeaker stand, such as the AtlasIED SS500E.

The RDL TX-J2 is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors.

The TOA U-03R is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a low-cut and a high-cut filter.

The Yamaha VCSB-L1 is a bracket for 2-axis adjustment of two vertically linked arrays.

Allows you to install an LC1 or LBC3951 series ceiling loudspeaker in a drop-in tile ceiling. The bridge consists of 2 rails and spreads the weight of the speaker for safe installation.

The TOA B-41S balanced line input module with mute-send is a line module to be used in conjunction with the 900 series and AX-1000.  It has a voice-activated muting control output and a balanced input. Transformer isolation minimizes ground loop problems when connecting remote equipment.

The TOA 9000 series digital mixer/amplifiers consists of two mixer/amplifier models (A-9060D and A-9120D) a mixer-only version, (M-9000) and four accessory modules, for which all models feature eight module ports allowing designers to configure custom systems.

The TOA S-04S T switch-selectable tone generator generates one of four tones via switch-closure. Can be used for doorbell, paging, door/gate release, telephone night ringer, annunciator, class change or pre-announcement tone.

The Electro-Voice RR-810 rough-in mounting plates are designed for use with the EVID C8.2HC and C10.1 ceiling speaker systems.

The TOA T-02S Unbalanced Line Input with Music-On-Hold Output is a line input module for feeding remote equipment such as mixers, amps, tape recorders, and telephone system with Music-On-Hold inputs.