Search results for '%22anchor audio AN-135%2B%22'
-
Ashly Audio Pema 4125.70 4-Channel Power Amplifier 4 x 125W @ 70V with Protea DSP
The Ashly Pema 4125.70 DSP processor features a new sleek look, 4-channel at 125 Watts per channel. The Pema is a matrix mixer with 8-in x 8-out where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 4250 4-Channel Power Amplifier 4 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.
-
Ashly Audio Pema 4250.70 4-Channel Power Amplifier 4 x 250W @ 70V with Protea DSP
This Ashly Pema 4250.70 powered digital signal processor consists of 8 inputs and 4 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.
-
Ashly Audio Pema 8250.70 8-Channel Power Amplifier 8 x 250W @ 70V with Protea DSP
This Ashly Pema 8250.70 powered digital signal processor consists of 8 inputs and 8 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.
-
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne4800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne8800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 4x8 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 8 Out)
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 8x4 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 4 Out)
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 12x4 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 4 Out)
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 12x8 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 4x20 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 20 Out)
The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 16x8 Network-Enabled Audio Matrix Processor with Protea DSP (16 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Stewart Audio FLX-E-80-4-CV 4-Channel DSP Enabled Amplifier 4 x 80W @ 70/100V
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Ashly Audio nXp1.54 Network Power Amplifier with Protea DSP
The Ashly’s nXp1.54 Network Power Amplifier with Protea DSP, its features lightweight, energy efficient Class D switching amplifier technology combined w/ multiple independent power supplies that provide increased performance, reliability.
-
Bose ControlSpace ESP-4120 Signal Processor (Discontinued)
The Bose ControlSpace ESP-4120 sound processor is a single-rack-space DSP with an 4x12 analog audio configuration, built-in ESPLink output, an open digital expansion slot ready to accommodate optional Dante or AVB network audio cards. -
Bose ControlSpace ESP-880 Signal Processor (Discontinued)
The Bose ControlSpace ESP-880 sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in ESPLink output, an open digital expansion slot ready to accommodate optional Dante or AVB network audio cards.
-
Bose ControlSpace ESP-1240 Signal Processor (Discontinued)
The Bose® ControlSpace® ESP-1240 engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options.
-
Ashly Audio nXp 1502 2 Channel Networkable Multi-Mode Amplifier and DSP
The nXp 1502 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nXp 754 4 Channel Networkable Multi-Mode Amplifier and DSP
The nXp 754 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%)