Search results for 'dante'
-
Bose ControlSpace EP22-D Dante Endpoint
The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system.
-
RDL SF-NP50A Network to 50W Mono Audio Amplifier - 70V or 100V Output
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
List $886.26Price $664.70Savings $221.56 (25%) -
Bose ControlSpace EP40-D 4 Input Dante Endpoint (Discontinued)
The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring.
-
Atlas Sound DNA2404DL 70.7V Dante 4-Channel Network Audio Amplifier
The AtlasIED DNA2404DL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante digital audio input and four channels of 600W amplification.
-
Bose ControlSpace EX-UH Dante Under-Table Endpoint with USB
Optimized for use with the EX-1280C, the Bose EX-UH Dante endpoint, is a convenient, cost effective solution for connecting remote BYOD devices or telephone handsets over a single cat-5/6 cable.
-
Bose ControlSpace EX-8ML Dante Under-Table Endpoint with 8 Mic Inputs
Optimized for use with the EX-1280C, the Bose EX-8ML Dante endpoint, is a convenient, cost effective solution for connecting up to 8 conferencing microphones over a single cat-5/6 cable.
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%) -
Atlas Sound IP108-D-CS GLOBALCOM IP Announcement Control System with 8 Dante Message Channels
The Atlas IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®. IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Atlas Sound IP116-D-CS GLOBALCOM IP Announcement Control System with 16 Dante Message Channels
The IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®.IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.