Search results for 'dante'
-
Aviom D400-Dante A-Net Distributor
Like the D800 family of A-Net Distributors, the D400-Dante provides robust, reliable connectivity, delivering power and audio to your Aviom Personal Mixer—at an unbeatable price.
-
Aviom D800-Dante A-Net Distributor
The Aviom D800-Dante A-Net Distributor provides the link between the input module or console card and the Personal Mixer, providing power and a copy of the digital audio stream to your Aviom Personal Mixer, utilizing a standard Cat-5e cable.
-
Listen Tech LW-150P-02-D Listen Everywhere 2-Channel Wi-Fi Audio Server with Dante
The Listen Everywhere LW-150P is an affordable way to deliver 2 DanteĀ® audio channels to audiences of up to 1000 users. The rear panel Dante input allows for easy audio routing and management via Dante ControllerĀ® software. -
Tascam IF-DA64 64-Channel Dante Interface Card
The Tascam IF-DA64 Dante interface card can be installed into your TASCAM DA-6400 multitrack recorder to add Dante connectivity to your recording capabilities.
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Bose ControlSpace Fixed-I/O Dante Network Card (Discontinued)
The Bose® ControlSpace® Fixed-I/O Dante™ Network Card provides 16 input and 16 output channels of low-latency digital audio using the Dante™ audio networking solution from Audinate®.
-
SoundTube IPD-SM82-EZ-II 8" IP-Addressable Dante-Enabled Surface Mount Speaker - White
The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.
-
SoundTube IPD-SM82-EZ-II 8" IP-Addressable Dante-Enabled Surface Mount Speaker - Black
The SoundTube IPD-SM82-EZ-II is a Dante-enable, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Tascam ML-16D 16-Channel Dante to Analog Converter
The Tascam ML-16D is a professional Dante-focused 16-channel converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
-
Tascam ML-32D 32-Channel Dante to Analog Converter
The Tascam ML-32D is a professional Dante-focused 32-channel converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors.
-
Attero Tech unD4O Dante/AES67 Networked Audio Interface
The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.
-
Rane Commercial DANTEx Dante Expansion Card
The Rane DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
RDL SF-NP50A Network to 50W Mono Audio Amplifier - 70V or 100V Output
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
List $886.26Price $664.70Savings $221.56 (25%) -
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
ProCo AODDP-4XF 4-Input Dante Wall Plate
The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-2XF2XM 2-Input + 2-Output Dante Wall Plate
The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-4XM 4-Output Dante Wall Plate
The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
Audix M55WD Hanging Ceiling Microphone with Adjustable Height for Dante AES67 Integrated Microphone Systems
The Audix M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.
-
SoundTube IPD-TSB2.0 Ultra Thin Dante-Enabled Sound Bar
The SoundTube STNetĀ® Ultra-Thin 2-way Dante-Enabled Soundbar. For conference rooms, classrooms, and offices, as part of an IP-based system. -
Yamaha DZR10-D 10" 2-Way 2000W Dante-Equipped Powered Loudspeaker
The Yamaha DZR10-D is a Dante-equipped 2-way bi-amped powered loudspeaker that offers superb clarity at an impressive maximum SPL of 137dB. With best-in-class SPL performance, sophisticated DSP processing, and unrivaled low-frequency sound reproduction, the DZR10-D realizes a truly professional sound delivered with a level of power that belies its compact, lightweight design.