Search results for 'dante'
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Attero Tech unD4O Dante/AES67 Networked Audio Interface
The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
ProCo AODDP-4XF 4-Input Dante Wall Plate
The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-2XF2XM 2-Input + 2-Output Dante Wall Plate
The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-4XM 4-Output Dante Wall Plate
The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODST-4XF 4-Input Dante Drop Snake Box
The ProCo AODST-4XF dropbox provides one RJ45 Dante input and four Neutrik® XLR connectors for inputs or our outputs. Using our rugged aluminum extrusion, this ProCo® AoD dropbox can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODST-2XF2XM 2-Input + 2-Output Dante Drop Snake Box
The ProCo AODST-2XF2XM dropbox provides one RJ45 Dante input and four Neutrik® XLR connectors for inputs or our outputs. Using our rugged aluminum extrusion, this ProCo® AoD dropbox can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODST-4XM 4-Output Dante Drop Snake Box
The ProCo AODST-4XM dropbox provides one RJ45 Dante input and four Neutrik® XLR connectors for inputs or our outputs. Using our rugged aluminum extrusion, this ProCo® AoD dropbox can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
Audio-Technica ATND971a Cardioid Condenser Boundary Microphone with Dante Network Output
The Audio-Technica ATND971a has bridged the gap between audio and IT with the first wired microphone that transmits audio and controls data together over the Dante network protocol. A simple Ethernet connection allows the network microphone to communicate across an existing network of Dante-enabled devices and, with the mic's integrated, programmable user switch, control any of those devices at the push of a button.
List $629.99Price $629.00 -
Attero Tech unD4I-L 4-Channel Mic/Line In Dante/AES67 Networked Audio Interface
The Attero Tech unD4I-L four input Dante interface is the ideal device for adding mic/line inputs to a Dante system. The addition of four logic outputs allows easy interface with microphone switches and indicator LEDs. The unD4I-L features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel's gain and phantom power status for easy troubleshooting.
-
Atlas Sound DA-PM8GD-B 8" Pendant Mount PoE Dante Speaker System - Black
The AtlasIED DA-PM8GD is an 8" indoor pendant mount IP PoE amplified loudspeaker featuring Audinate’s Dante digital audio transport platform. The DA-PM8GD supports a 8" efficient speaker design with a sensitivity of 98dB 1W/1m and a maximum output of 109dB. -
Atlas Sound DA-APX PoE+ Dante Outdoor Weather Resistant Horn Speaker
The AtlasIED DA-APX is a weather resistant IP PoE amplified constant directivity high-output horn featuring Audinate’s Dante digital audio transport platform. The DA-APX features a 60° x 40° constant-dispersion pattern across the controlled frequency band of 1.25-10 kHz. -
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Attero Tech Axon D2FLEXio Dual Analog Flex I/O Dante/AES67 Interface
The Attero Tech D2FLEXio provides cost-effective analog audio connectivity for installed AV systems. The small, unobtrusive form factor provides easy installation - anywhere.
-
Audix DN4 Microphone Interface with 4 Ports for Audix RJ45-Equipped Single-Element Microphones
The Audix DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone.
-
Audix DN43 Microphone Interface with M3 Port and Port for Audix RJ45-Equipped Single-Element Microphones
The Audix DN43 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone.