Search results for 'anchor audio'
-
Radial Engineering StageBug SB-1 Active Acoustic Direct Box
The Radial StageBug SB-1 is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don’t let the small size deter… this ultra-compact StageBug sounds absolutely terrific!
-
Radial Engineering Reamp HP Compact Studio Reamper
The Radial Reamp HP takes the signal from a headphone output jack on an audio interface or a mobile device and converts it to feed mono guitar amps and effects pedals for Reamping. -
Radial Engineering Power-1 Rackmount Power Supply and Surge Suppression
The Radial Engineering Power-1 is clean power filtering unit in a rugged rackmount enclosure, providing anyone with valuable electronic gear and audio equipment with superior filtering against interference along with peace-of-mind surge protection. -
Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake (XLR-F)
The Radial Catapult Mini TX is a 4-channel compact audio snake that allows you to send analog audio signals over standard Cat 5 or Cat 6 shielded twisted pair cable. The model TX is a mini breakout box to (4) female XLR cables.
-
Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake (XLR-M)
The Radial Catapult Mini RX is a 4-channel compact audio snake that allows you to send analog audio signals over standard Cat 5 or Cat 6 shielded twisted pair cable. The model TX is a mini breakout box to (4) male XLR cables.
-
Radial Engineering StageBug SB-5 Laptop Passive Stereo Direct Box for Laptops and Mobile Device
The Radial StageBug SB-5 is a compact stereo direct box designed to connect laptop computers, smartphones, tablets, or any mobile device to pro audio equipment and PA systems.
-
Radial Engineering Catapult MINI TRS 4-Channel Cat 5 Audio Snake (TRS)
The Radial Catapult Mini TRS is a 4-channel compact audio snake that allows you to send analog audio signals over standard Cat 5 or Cat 6 shielded twisted pair cable. The model TX is a mini breakout box to (4) TRS cables.
-
Radial Engineering ProDI Passive Direct Box
The Radial Engineering ProDI is high-quality,full-range passive direct box equipped with custom made audio transformers for exceptional signal handling without saturation and with extremely low phase distortion in the critical bass and mid regions.
-
Radial Engineering Pro48 Active 48V Direct Box
The Radial Engineering Pro48 is an active direct box designed for use on stage or in home recording studios, with exceptional signal handling for use with both active and passive instruments.
-
Radial Engineering ProRMP Studio Reamper
Re-amping has been the 'secret weapon' for countless recordings by the biggest names in the business and the process is often used on guitars, bass, keyboards, percussion and even voice to create new textures.
-
Radial Engineering HotShot DM-1 Stage Mic Toggle
The Radial HotShot DM-1™ is a dynamic microphone switcher with a momentary toggle footswitch, allowing an artist on stage to redirect a vocal mic to feed the stage monitoring system and communicate with band members or technicians. -
Radial Engineering ProAV1 Passive Multimedia Direct Box
The Radial Engineering ProAV1 is a passive direct box specifically designed for audio-video integrators and technicians, featuring a variety of stereo inputs that are summed to mono via a resistive mixer, greatly simplifying signal management.
-
Radial Engineering StageBug SB-6 Passive Stereo Line Isolator
The Radial StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices. -
Radial Engineering MIX 2:1 Two-Channel Audio Combiner and Mixer
The Radial Engineering The MIX 2:1™ is a simple yet highly useful mixer that passively sums two audio channels down to one. This enables you to easily sum the stereo outputs of a console, recording interface, or portable playback device down to mono, or to mix any two signals together and balance their relative input levels.
-
Radial Engineering ProAV2 Stereo Passive Multimedia Direct Box (Open Box)
Free Shipping!The Radial Engineering ProAV2 is a stereo passive direct box designed for audio-video integrators and technicians, with an array of input connector options to easily interface with a wide range of audio equipment.
List $264.00Regular Price: $219.99
Pro Acoustics Price $188.99
Savings $75.01 (28%) -
Radial Engineering ProD2 Stereo Passive Direct Box
The Radial Engineering ProD2 is high-quality, full-range passive direct box equipped with custom-made audio transformers for exceptional signal handling without saturation and with extremely low phase distortion in the critical bass and mid regions.
-
Radial Engineering ProAV2 Stereo Passive Multimedia Direct Box
The Radial Engineering ProAV2 is a stereo passive direct box designed for audio-video integrators and technicians, with an array of input connector options to easily interface with a wide range of audio equipment.
-
Radial Engineering Catapult TX4 4-Channel Cat 5 Audio Snake with 4 XLR INs and 4 XLR OUTs (Transmitter)
The Radial Catapult TX4 is a four-channel snake that allows you to route four XLR connections across long distances using Cat 5 or Cat 6 cable, doing so with little to no signal degradation. -
Radial Engineering USB-Pro Stereo USB Laptop DI (Open Box)
Free Shipping!The Radial USB-Pro is a plug and play, 24 bit digital to analog audio converter designed to convert sound files from a laptop computer and seamlessly transfer them to a pair of balanced audio outputs to feed a PA, recording or broadcast mixing console.
List $336.00Regular Price: $279.99
Pro Acoustics Price $239.99
Savings $96.01 (29%) -
Radial Engineering JDI Premium Passive Direct Box
The Radial Engineering JDI is considered by many to be the world’s finest direct box. It is a passive DI that employs a Jensen isolation transformer for optimum audio performance offering outstanding linearity.
-
Radial Engineering JPC Computer Direct Box
The Radial JPC is a stereo direct box that has been specifically designed for use with computer sound cards and other consumer electronic products to allow these to be connected to a professional sound system.
-
Radial Engineering PZ-DI Orchestral Instrument Direct Box
The Radial PZ-DI is a unique direct box that is specifically designed for acoustic and orchestral instruments. Unlike most direct boxes that are limited to a 'one size fits all' design. -
Radial Engineering J+4 Balanced Signal Driver
The Radial J+4 is a stereo interface designed to accept consumer level -10dB unbalanced high impedance signals and convert them to +4dB balanced low impedance signals for easy manipulation in professional level environments.
-
Radial Engineering USB-Pro Stereo USB Laptop DI
The Radial USB-Pro is a plug and play, 24 bit digital to analog audio converter designed to convert sound files from a laptop computer and seamlessly transfer them to a pair of balanced audio outputs to feed a PA, recording or broadcast mixing console.