Search results for 'dante'

The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring.

The AtlasIED DNA2404DL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante digital audio input and four channels of 600W amplification.

Optimized for use with the EX-1280C, the Bose EX-UH Dante endpoint, is a convenient, cost effective solution for connecting remote BYOD devices or telephone handsets over a single cat-5/6 cable.

Optimized for use with the EX-1280C, the Bose EX-4ML Dante endpoint, is a convenient, cost effective solution for connecting up to 4 conferencing microphones over a single cat-5/6 cable.

Optimized for use with the EX-1280C, the Bose EX-8ML Dante endpoint, is a convenient, cost effective solution for connecting up to 8 conferencing microphones over a single cat-5/6 cable.

The Williams Sound WaveCAST with Dante is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered.

The Atlas Sound IPUSBD-8 is a Dante™ network audio device providing 8x8 input/output channels of digital audio to/from a USB port of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports.

The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.

The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.

The Atlas IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®. IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.

The IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®.IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.