Search results for 'volume control'
-
DBX ZC-8 Wall-Mounted Zone Control
The DBX ZC-8 provides both programmable source selection and volume control to ZonePRO devices such as the ZonePRO 640 and 641. -
Stewart Audio FLX-E-80-4-CV 4-Channel DSP Enabled Amplifier 4 x 80W @ 70/100V
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
-
Bogen Communications TPU35B 35W Telephone Paging Amplifier
The Bogen Communications TPU35B is a wall-mounted telephone paging amplifier rated at 35 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.
-
Bogen Communications TPU250 250W Telephone Paging Amplifier
The Bogen Communications TPU250 is a wall-mounted telephone paging amplifier rated at 250 watts, that can also be rack-mounted. This TPU amplifier permits paging from telephone and/or microphone; music input through an RCA jack or screw terminals; and voice-activated, variable level, music mute with fade back after page.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Bose PowerShare PS604 Adaptable Power Amplifier (Discontinued)
The Bose® PS604 is a 4-channel installed amplifier that allows its total 600 watts to be shared across all four outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.
-
Bose PowerShare PS602 Adaptable Power Amplifier 2 x 300 Watts 4-8Ω 70/100V (Discontinued)
The Bose® PS602 is a 2-channel installed amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.
-
Bose PowerShare PS602P Adaptable Power Amplifier 2 x 300 Watts 4-8Ω 70/100V (Discontinued)
The Bose® PS602P is a 2-channel portable amplifier that allows its total 600 watts to be shared across both outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output.
-
Bose PowerShare PS404A Adaptable Power Amplifier with AmpLink (Discontinued)
The Bose PowerShare PS404A adaptable power amplifier delivers 400 watts for fixed-install applications. Through patented technology, total amplifier power is shared across all output channels, allowing installers the freedom to utilize power where needed.
-
Bose PowerShare PS604A Adaptable Power Amplifier with AmpLink (Discontinued)
The Bose PowerShare PS604A adaptable power amplifier delivers 600 watts for fixed-install applications. Through patented technology, total amplifier power is shared across all output channels, allowing installers the freedom to utilize power where needed.