Search results for '%22anchor audio AN-135%2B%22'
-
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
OWI MC4 Four-Channel Audio Control Mixer
The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.
-
Stewart Audio FLX-E-80-4-CV 4-Channel DSP Enabled Amplifier 4 x 80W @ 70/100V
The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.
-
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Rolls RM67 Mic/Source Mixer
The Rolls RM67 mic/source mixer is a single rack space mixer designed for the install/contractor market. The unit mixes three balanced microphones with four stereo sources to mono or stereo balanced outputs. The XLR microphone inputs have Mic/Line level switches, a send/return Insert jack, and individually switchable +12 VDC phantom power.
List $339.00Price $269.00Savings $70.00 (21%) -
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Cambridge Qt X 805 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and AVB Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Cambridge Qt X 805D 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and Dante Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Cambridge Qt X 800 8 Zone Sound Masking Generator and Control Module with AVB Media Network
The Cambridge Qt X 800 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 800D 8 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 800D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 600 6 Zone Sound Masking Generator and Control Module with AVB Media Network
The Cambridge Qt X 600 control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 600D 6 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 600D control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Allen & Heath GR4 Desktop and Rack Mount Installation Zone Audio Mixer
The Allen & Heath GR4 Installation Zone Mixer is a 1U rack-mounting or desktop audio mixer, that includes a mic input on the front panel, plus a 3.5 mm jack on the front for portable music sources.
-
Pure Resonance Audio PTT1 Desktop Push-to-Talk Gooseneck Microphone (Open Box)
The Pure Resonance Audio PTT1 desktop push-to-talk microphone provides excellent performance and reliability, ideal for paging, announcements, general public address, and communication applications. The PTT1 features a uni-directional dynamic gooseneck microphone, table-stand, dual momentary locking switch, 5-foot cable, and three-pin male XLR connector. The durable gooseneck and metal table-stand ensure the PTT1 push-to-talk paging microphone can withstand even the toughest daily use in commercial environments.Free Shipping!List $105.99Regular Price: $89.99
Pro Acoustics Price $72.99
Savings $33.00 (31%) -
Rane Commercial RAD16z Remote Audio Device Dual I/O Euroblock AD Converter
The RAD16z is an alternative to standard switchboxes for impractical areas such as in stage floor pockets or above ceilings. Its form factor is a rugged metal box with flexible surface mounting options. The RAD16z is plenum-rated UL 2043.
List $349.99Price $349.00 -
Cambridge Qt X 300 3 Zone Sound Masking Generator and Control Module with AVB Media Network
The Cambridge Qt X 300 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. The Qt X 300 controls up to three zones of Qt standard or active emitters. -
Cambridge Qt X 300D 3 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 300D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. The Qt X 300D controls up to three zones of Qt standard or active emitters. -
SoundTube STNet Switch II 16-Port 40W PoE per Port Audio Quality Switch
The SoundTube STNet Switch II is designed for use with SoundTube STNet IPD speakers. It guarantees 40W of PoE power to all 16 ports simultaneously