Search results for 'dante'
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Shure ANI22-XLR ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Shure ANI22-Block ANIUSB MATRIX USB Audio Network Interface
The Shure ANI22 Audio Network Interface provides 2 channels of Dante-to-analog and 2 channels of analog-to-Dante conversion. A single interface provides a simple way to connect analog equipment to the audio network, such as wireless microphones, audio processors, video codecs, and loudspeaker systems.
-
Yamaha XMV4140-D 4-Channel Commercial Power Amplifier with Dante
The Yamaha XMV4140-D 4-channel 70V/4 ohm/8 ohm power amplifier with Dante for simple and fast system configuration -
Yamaha XMV8280-D Commercial Power Amplifier with Dante
The Yamaha XMV8280-D multi-channel power amplifier combines Class-D efficiency with features designed specifically to benefit commercial installation sound systems. -
SoundTube IPD-SM500i-II 5.25" Dante-Enabled IP-Addressable Surface Mount Speaker - Black
The SoundTube IPD-SM500i-II is a 5.25", 2-way surface-mount speaker for IP-addressable audio networks on the Dante platform. It incorporates a 5.25" polypropylene woofer and 1" convex titanium tweeter with waveguide in an injection-molded, glass fiber reinforced ABS enclosure.
-
SoundTube IPD-SM500i-II 5.25" Dante-Enabled IP-Addressable Surface Mount Speaker - White
The SoundTube IPD-SM500i-II is a 5.25", 2-way surface-mount speaker for IP-addressable audio networks on the Dante platform. It incorporates a 5.25" polypropylene woofer and 1" convex titanium tweeter with waveguide in an injection-molded, glass fiber reinforced ABS enclosure.
-
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
Yamaha MTX3 26x8 Matrix Mixer and Signal Processor with Feedback Suppressor
The Yamaha MTX3 processor is designed to maximize the performance of sound systems in multi-zone commercial installations. -
Yamaha MTX5-D Matrix Mixer with Signal Processor
The Yamaha MTX5-D processor is designed to maximize the performance of sound systems in multi-zone commercial installations. -
Tannoy QFLEX 16 Digitally Steerable Powered Column Array Loudspeaker with DSP
The Tannoy QFLEX 16 is a powered, digitally steerable multi-channel, column array loudspeaker designed as a complete solution for installed applications with challenging acoustics, such as houses of worship, transportation hubs, convention centers, conference facilities, shopping malls, performing arts centers and museums.