Cloud Electronics 36-50 2 Zone Plus Utility Mixer Amplifier

Home /
Cloud Electronics 36-50 2 Zone Plus Utility Mixer Amplifier (Discontinued)

Description

Details

The Cloud 36-50 provides both power and control for venue sound systems from a single, cost effective unit. Ideal for shops, pubs, restaurant and bars, the 36-50 combines the features and versatility of our best selling zone mixer with the reliability of our rugged, 50W amplifier modules.

This remarkable product offers 6 music source connections, plus 1 microphone input, fully configurable into 2 main output zones, plus a third 'utility' output, all at 50W. This third output may be used to provide sound in peripheral areas such as storerooms, toilets, foyers and corridors, or it can be used as a slave to zone 1, effectively doubling the power available to that zone.

Features

Features

2 zone mixer/amplifier with utility output
6 line inputs, 1 mic input with paging options for zone 1, zone 2 and utility output
Music level and source selection with remote control RSL-6
3 x 50W for Z1, Z2 and utility output with dynamic clip limiters on every amplifier
The 50W utility amplifier can provide zone 1 with 100W
Optional 3 x 40W 100V or 70V internal module (CXL-3120)
Separate EQ for music and mic signals
Optional equaliser modules for Bose loudspeakers can be fitted to any output

Specification

Line Inputs
Frequency Response	20 Hz to 20 kHz ±0.5 dB
Distortion	<0.05%, 20 Hz to 20 kHz
Sensitivity	195 mV (-12 dBu) to 2.0 V (+8 dBu)
Input Gain Control	20 dB Range
Input Impedance	47 kohms
Headroom	>20 dB
Noise	-90 dB A-Weighted (0 dB Gain)
Equalisation	HF: ±10 dB @ 10 kHz LF: ±10 dB @ 50 Hz
Microphone Input
Frequency Response	100Hz -3 dB (Fixed Filter) To 20 kHz ±0.5 dB
Distortion	<0.05%, 20 Hz to 20 kHz
Gain Range	0 dB to 60 dB
Common Mode Rejection	>70 dB @ 1 kHz
Input Impedance	>2 kohms (Balanced)
Headroom	>20 dB
Noise	-126 dB EIN (22 Hz - 22 kHz, 150 ohms)
Equalisation	HF: ±10 dB @ 5 kHz LF: ±10 dB @100 Hz
Outputs
Low Impedance Outputs: 4 ohm Load (s)
1 Channel Driven	60 watts
2 Channels Driven	52 watts
3 Channels Driven	45 watts
Low Impedance Outputs: 8 ohm Load (s)
1 Channel Driven	37 watts
2 Channel Driven	34 watts
3 Channel Driven	30 watts
100 V-line Output*	100 V Balanced – 250 ohm Minimum Load
70 V-line Output*	70 V Balanced – 125 ohm Minimum Load
Amplifier Protection	VI Limiting, DC Offset, Thermal & Switch-On Delay
Cooling	Convection
General
Power Input	230 V ±5% (115 V ±5% Available)
Fuse Rating	230 V: T3.15AH; 115 V: T6.3AH
Fuse Type	20 mm x 5 mm 250 V
Dimensions (H x W x D)	3.5" (88 mm) x 19" (482.6 mm) x 11.8" (300 mm)
Shipping Dimensions (H x W x D) (Gross)	8" (200 mm) x 24" (610 mm) x 18" (460 mm)
Weight	15 lbs (6.7 kg)
Shipping Weight (Gross)	20 lbs (8.9 kg)

Documents