The 46-120T Media 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed.
Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of an optional RSL-6 / RSL-6A Remote Source / Volume Select controller. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones.
The onboard Media-Player allows playback of MP3 / WMA content from an SD Card or USB Flash Drive, selectable in each of the four zones.
An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T Media suitable for numerous applications in retail, leisure, education and hospitality.
The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection.
The 46/120T Media Mixer Amplifier provides a feature packed single-box solution for four zone venues of all sizes.
| Line Inputs | |
|---|---|
| Frequency Response | 20 Hz to 20 kHz +0/-0.5 dB |
| THD + N | 0.04% @ 1 kHz; 22 kHz Bandwidth |
| Sensitivity | 195 mV (-12 dBu) to 2.0 V (+8 dBu) |
| Input Gain Control | 20 dB Range |
| Input Impedance | 47 kohms |
| Headroom | 17 dB |
| Noise | -90 dB rms; 22 kHz Bandwidth |
| Equalisation | HF: ±10 dB @10 kHz; LF: ±10dB @ 50 Hz |
| Microphone Inputs | |
| Frequency Response | 100 Hz -3 dB (Fixed Filter) to 20 kHz ±1 dB |
| Distortion | |
| Gain Range | 10 dB to 50 dB |
| Common Mode Rejection | 70 dB Typical |
| Input Impedance | 3.3 kohms (Balanced) |
| Headroom | 17 dB |
| Noise | -127 dB EIN 22 Hz - 22 kHz (Rs = 150 ohms) |
| Equalisation | HF: ±10 dB @ 5 kHz LF: ±10 dB @100 Hz |
| Outputs | |
| 4 ohm Load | 120 W (170 W One Channel Driven) @ 1 kHz & 0.1% THD+N |
| 8 ohm Load | 85 W (100 W One Channel Driven) @ 1 kHz & 0.1% THD+N |
| Frequency Response | -1 dB @ 20 kHz, -0.5 dB @ 20 kHz |
| Distortion | |
| Min. Load | 70 V Balanced – 42 ohm Min. Load 100 V Balanced – 83 ohm Min. Load |
| Frequency Response | -3 dB @ 65 Hz (Filter), -2.5 dB @ 20 kHz |
| Distortion | |
| Amplifier Protection | Dynamic Clip Protection, VI Limiting, DC Offset, Thermal & Switch-On Delay |
| Cooling | Variable speed DC Fan (Stationary in Idle Mode) |
| General | |
| Power Input | 230 V ±5% (115 V ±5% By Internal Connection) |
| Fuse Rating | 230 V: T4A; 100/115 V: T8A |
| Fuse Type | 20 mm x 5 mm HBC |
| External Remote Power-Down | 4.7 W, 7.75 VA |
| Idle – 4 chs APD | 13.4 W, 16.75 VA |
| Idle – 3 chs APD | 16.3 W, 20.5 VA |
| Idle – 2 chs APD | 19.2 W, 24.9 VA |
| Idle – 1 ch APD | 22.2 W, 29.4 VA |
| Idle, All chs Active | 25.2 W, 33.6 VA |
| Noise Input, 1/3 Rated Power, 4 ohms | 440 W, 560 VA |
| Noise Input, 1/3 Rated Power, 8 ohms | 275 W, 362 VA |
| Noise Input, 1/8 Rated Power, 4 ohms | 280 W, 370 VA |
| Noise Input, 1/8 Rated Power, 8 ohms | 175 W, 240 VA |
| Dimensions (H x W x D) | 3.5" (88 mm) x 19" (482.6 mm) x 16" (407 mm) |
| Shipping Dimensions (H x W x D) | 6" (157 mm) x 24" (610 mm) x 21" (542 mm) |
| Weight | 35.28 lbs (15.75 kg) |
| Shipping Weight | 40.21 lbs (17.95 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
