- Description
Details
The 46-50 offers simple, direct connection of two microphones and six music sources which can be routed to feed four different output zones with up to 50W of clean audio power. The 46-50's music programme and level can be controlled remotely. A paging facility is available with the optional PM-Series paging microphones. So, if a simple one-box solution is required for a four zone venue, look no further than the Cloud 46/50.
- Features
Features
- 4 zone mixer/amplifier
- 4 x 50W with dynamic clip limiters on every zone
- Mic 1 priority over Mic 2
- Line 6 input priority (zone 1 only) with adjustable release time
- 6 line inputs, 2 mic inputs with voice operated priority over the music
- Music level and source selection with remote control RSL-6 (or RL-1 -level only)
- Facility input (zone 1 only) for active modules DM-1 and LM-1
- Amplifier link feature when used on 2 zone or 3 zone systems
- Optional paging mic with chime available
- Optional equaliser modules for Bose loudspeakers can be fitted to any zone
- Utility output
- Optional 4 x 40W 100V or 70V internal module (CXL-4160)
- Remote music mute for Fire Alarm interface
- Installer settings behind an anti-tamper panel
- Forced cooling by vari-speed fan
- Specification
Line Inputs Frequency Response 20Hz – 20KHz +/-0.5dB Distortion <0.03%, 20 Hz to 20 kHz Sensitivity 195 mV (-12 dBu) to 2.0 V (+8 dBu) Input Gain Control 20 dB Range Input Impedance 47 kohms Headroom >20 dB Noise -90 dB (0 dB Gain, 22 Hz to 22 kHz) Equalisation HF: ±10 dB @ 10 kHz; LF: ±10 dB @ 50 Hz Microphone Input Frequency Response 100 Hz -3 dB (Fixed Filter) to 20 kHz ±0.5 dB Distortion <0.05%, 20 Hz to 20 kHz Gain Range 10 dB to 50 dB Common Mode Rejection >70 dB @ 1 kHz Input Impedance >2 kohms (Balanced) Headroom >20 dB Noise -128 dB EIN 22 Hz - 22 kHz (Rs = 150 ohms) Equalisation HF: ±10 dB @ 5 kHz LF: ±10 dB @100 Hz Outputs Low Impedance Outputs 4 ohm Load, 50 W
8 ohm Load, 35 WAuxiliary Outputs (Zones 1 & 2) 0 dBu
(Unbalanced)100 V-Line Output* 100 V Balanced – 250 ohm Minimum Load 70 V-Line Output* 70 V Balanced – 125 Ohm Minimum Load Amplifier Protection Dynamic Clip Protection, VI Limiting, DC Offset, Thermal & Switch-On Delay Cooling Variable Speed DC Fan General Power Input 230 V ±5% (115 V ±5% Available) Fuse Rating 230 V: T3.15AH; 115 V: T6.3AH Fuse Type 20 mm x 5 mm 250 V Dimensions (H x W x D) 3.5" (88 mm) x 19" (482.6 mm) x 15" (382 mm) Shipping Dimensions (H x W x D)
(Gross)8" (200 mm) x 24" (610 mm) x 18" (460 mm) Weight 17 lbs (7.65 kg) Shipping Weight
(Gross)23 lbs (10.2 kg) - Documents
Documents
- Reviews
Write Your Own Review











