Commercial Sound Equipment

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Pure Resonance Audio RZMA240BT is a powerful 4-zone commercial mixer amplifier with built-in MP3, FM tuner, and Bluetooth. With 4 x 240-watt output at 4 ohms, 70, and 100 volts, it offers advanced matrix technology for flexible input assignments.

WHILE SUPPLIES LAST!  Get a FREE PMZ16 Paging Microphone with the Purchase of Any RZMA Series Multi-Zone Mixer Amplifier

The Shure SCM810 8 channel automatic mixer features the Shure patented IntelliMix, which activates only microphones being addressed, minimizing poor audio caused by multiple open microphones.

The TOA DA-250FH power amplifier utilizes advanced digital technology to provide multi-channel high power outputs. Featuring high efficiency amplifier topology, the high impedance version DA-250FH is ideal for various installed sound applications.

The Speco Technologies PL200M four zone commercial amplifier is the next generation of Speco Technologies' commercial amplifiers. This advanced unit features matrix technology, letting you route up to 5 separate inputs to 4 distinct zones. This allows you to simultaneously play a different source in each zone.

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Atlas Sound HPA2602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70 V / 100 V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlas Sound HPA4202 Dual Channel Commercial Amplifier features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante 2-channel digital audio interface.

The TOA DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

Featuring easy-to-use, plug-and-play functionality, the ATUC-50 Digital Discussion System features easy-to-use, plug-and-play functionality, the ATUC-50 4 person digital discussion system offers reliable, clear and intelligible communication to significantly increase meeting efficiency and effectiveness. The ATUC-50DU has a 3-pin XLRF-type input for use with ATUC-M43H or ATUC-M58H microphones. Up to 50 ATUC-50DU discussion units can be connected, in either daisy chain or ring topology, to each ATUC-50CU control unit.

The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The wireless tablestand set SL TS 153 GN-L Set DW includes the SL Tablestand 153- DW, the MEG 14-40-L-II B gooseneck microphone, the SL Rack Receiver DW and everything needed for usage and installation.

The Gator Rackworks GRW-PNLSTFG2 is a 1.2 mm steel flanged panel that fits into a 2 RU rack space. The panel is constructed from cold-rolled 16 gauge steel and is flanged for rigidity with a black powder-coated finish.

The Atlas Sound AT10-RM Deluxe Rack Mounted Attenuator is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control applications.

The Atlas Sound AT35-RM Deluxe Rack Mounted Attenuator is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control applications.

The RM-300 is a hardware package required for the proper mounting of a single R300 RX receiver into a standard 19" audio rack.

The Atlas Sound AT100-RM Deluxe Rack Mounted Attenuator is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control applications.

The Atlas Sound AT100-PARM is a high-quality auto transformer that provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.