Commercial Sound Equipment

The well-controlled narrow coverage is ideal for improved voice intelligibility and musical clarity in high-ceiling venues or in rooms with difficult acoustics such as convention centers, transit...

The D SERIES-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other...

The FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.The FP-PA35A features a balanced line...

The Sennheiser MZFS 60 Floor Stand can be combined with the MZH goosenecks and ME microphone heads, and converted to wireless operation using an SKP 3000 or SKP 500 plug-on transmitter. The 60 cm...

The TOA 9000M2 Series Digital Matrix Mixer/Amplifiers redefine the conventional mixer/amplifier category by combining a modular matrix mixer, digital signal processor (DSP) and amplifiers in a...

The PH-16 is a dual-sided monaural headset with noise-canceling dynamic microphone. It fits under a helmet and has an EPA rated NRR of 24dB. The dynamic receivers have a special mounting which...

The MTC-81TB8 tile bridge is designed for use in applications requiring pre-installed backcans in suspended ceiling applications and is compatible with ceiling speakers having a 11.25" (286 mm)...

The WP1062 Wall Plate with Neutrik Combo XLR Female and 1/4" TRS connectors. Made with a brushed stainless steel finish.

JBL Control 60 Series JBL Control Contractor 60 Series Pendant loudspeakers bring renowned JBL sound and outstanding coverage to rooms and venues with open architecture or high-ceilings, while...

The Ashly WR-2 Multi-Function Wall Network Remote Volume Control allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a euroblock on the...

The MZH 3042 is a metal gooseneck with two flexible sections for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling...

TOA's P-9060DH power amplifier is a 2-channel amplifier providing 60W per channel at 83Ω (70V line output). This amplifier can be used as power amplifier for the M-9000 (Matrix Mixer Pre-Amplifier)...

The PH-88 is a single-sided super lightweight headset for the ultimate in daylong comfort. It offers a dynamic noise-canceling gooseneck microphone with a semi-rigid, a fully adjustable boom for...

The JBL MTC-81BB8 is designed for use in applications requiring preinstalled backcans and is compatible with ceiling speakers having a 11.25" (286 mm) mounting circle diameter, such as the JBL 8138...

Flexible and simple. The FM receiver features easy-to-use, seek-button channel selection with access to 17 pre-set wideband frequencies between 72 - 76 MHz. Compatible with the following Williams...

The Ashly WR-1 is an assignable, dual potentiometer remote volume control for the controlled product. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which...

The PH-88-IC3 is a single-sided super lightweight headset for the ultimate in daylong comfort. It offers a dynamic noise-canceling gooseneck microphone with a semi-rigid, fully adjustable boom for...

The DST99 S is a paging microphone with a cardioid polar pattern for general public address and communication use. The DST99 S provides a frequency response tailored to speech use, for optimum...

The PPA R37N FM Receiver is flexible and simple. It comes with an additional belt clip, but without batteries. It features easy-to-use, seek-button channel selection with access to 17 pre-set...

The MZH 3040 single flex gooseneck stand with 3 Pin XLR connector is a metal gooseneck for use with the ME 34, ME 35 and ME 36 condenser microphone heads. This rugged, matt black gooseneck (Ø 6 mm)...