Commercial Sound Equipment

This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250...

The FA136T87FRK is UL classified for fire-resistance in the United States and Canada. It has passed a fire-rating up to three hours (rating varies by ceiling construction) and has been tested in accordance with the UL standard – Fire Test of...

The 410-15 10 RU desk top cabinet rack is a welded rack that provides desk-top access to (19") control and monitor equipment. The 410-15 is 16-gauge CRS and includes one pair of mounting rails, tapped 10-32, hardware and wiring access below rear door or...

The Listen Tech LA-81 4 Way RF Antenna Combiner is a passive device (no power supply needed) that takes four incoming RF signals and combines them into one outgoing antenna source. The combiner is used in applications where up to four different...

AtlasIED C803AT87FRK Fire Rated 8-Inch In-Ceiling Loudspeaker Kit The C803AT87FRK fire-rated 8-inch in-ceiling loudspeaker kit is a professionally engineered solution designed for high-performance audio and strict fire safety compliance. AtlasIED is the...

For basic ganging rack requirements, Atlas offers the 544-25 44RU Floor Rack. The 544-25 is 22 5/16" wide, 25 1/2" deep, and has 44 vertical panel spaces. The 500 Series Cabinets are welded 16-gauge CRS and assembled for immediate use. Rear doors...

The Listen Tech LA-80  2 Way RF Antenna Combiner is a passive device (no power supply needed) that takes two incoming RF signals and combines them into one outgoing antenna source. The combiner is used in applications where up to two different...

SoundTube RF31-EZ-T 3-Inch Premium Black Ceiling Speaker The RF31-EZ-T is a premium-grade, full-range 3-inch speaker engineered for exceptional performance in distributed audio systems. Designed with versatility in mind, it integrates a high-quality...

The Australian Monitor ZRM4 is a simple to use, yet highly featured 1RU zone routing mixer. Featuring 6 inputs that can be balanced XLR mic or dual RCA/balanced XLR line level, all available to any combination of 4 zone outputs, the ZRM4 makes signal...

The 410-4 is a compact aluminum baffle for wall or ceiling use. Compact unidirectional aluminum baffle/enclosure with one-piece grille provides long lasting service indoors or out. It features sturdy assembly features a spun .038 aluminum housing and...

Atlas Sound M2000-LP Dual 2"x4" Low Profile Sound Masking Speaker Systemwith 70 Volt Transformer The M2000-LP sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into small plenum spaces. The...

Williams AV CHG 3502 Dual-Unit Drop-In Charger The CHG 3502 is a compact and efficient 2-bay drop-in charger designed for use with body-pack style transmitters and receivers. Capable of charging two devices simultaneously, this charger ensures fast and...

The Atlas Sound DT12 1' x 2' Speaker Package with Enclosure combines ease of installation with superb intelligibility for speech and music reproduction. The 1' x 2' footprint allows quick installation into 2' x 2' or 2' x 4' acoustic tile ceilings. The...

The TSD-TXHL is a high to low level converter designed to interface with 4Ω/25/70/100V distributed speaker lines. An unbalanced line level output is provided to drive remote amplifiers or other devices. The TSD-TXHL allows easy expansion of zones...

Atlas Sound M812-S2T7-BX-RS 8" Sound Masking Speakerwith 5W 70V Transformer and Enclosure The M812-S2T7-BX-RS square enclosure offers a cubic content of 529 cubic inches (.087 m3) C10A, 8" diameter loudspeaker and a 70.7 V (T7) transformer. The...

The RK-GD28 smoked, tempered glass door fits 28 space BRK equipment racks. Assemble BRK / OBRK models. Move rackrail to recessed set of enclosure mounting holes using existing wood screws. Hardware kit includes Pivot Bushing, Magnet, Stop Pin, Locking...

The AWV4 4RU Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 4RU mounting configuration and creates...

The economical Atlas Sound 244-30 cabinet is 22 5/16" wide, 30" deep, and contains 44RU vertical panel spaces. The 244-30 cabinet includes one pair of 11-gauge CRS adjustable mounting rails. The rack is constructed of 16-gauge CRS and include base, top...

The RK-GD20 smoked, tempered glass door fits 20 space BRK equipment racks. Assemble BRK / OBRK models. Move rackrail to recessed set of enclosure mounting holes using existing wood screws. Hardware kit includes Pivot Bushing, Magnet, Stop Pin, Locking...

Model HD72W is a cost effective assembly that includes a high-quality 8" loudspeaker, 70.7V/25V transformer and screw type grill. Unit is shipped assembled, ready for installation. The HD72W features a conventional cone design loudspeaker with a 1"...