- Description
Details
JBL COL600-BK 24" Slim Column Loudspeaker
The COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor.
A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.
Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.
A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.
Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).
The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals.
- Features
Features
- Two 5 x 2.25 inch racetrack woofers and one 1 inch tweeter
- 24 inch tall with shallow 3.7 inch cabinet depth
- Wide 160° horizontal and focused 110° vertical coverage
- 10° downward tilt to aim for covering most listening areas without requiring physical down-tilting of the cabinet
- 80W continuous pink noise power handling (320W peak)
- 70 Hz – 20 kHz frequency range
- Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input
- 111 dB peak SPL (105 dB continuous), 2 hrs
- Tweeter near top of column for unobstructed coverage of listening space
- Versatile mounting brackets included – both
- Specification
Drivers Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Frequency Range (-10 dB) 70 Hz – 20 kHz Frequency Response (+/-3 dB) 105 Hz – 20 kHz Nominal Impedance 8Ω (in Thru/direct mode) Power Rating (8Ω Setting) 160W Continuous Program (2 hrs)
80W (320W peak) Continuous Pink Noise (2 hrs)
60W (240W peak) Continuous Pink Noise (100 hrs)Sensitivity (2.83V @ 1m) 86 dB Coverage Pattern Vertical 110° (1kHz-4 kHz average); 10° down-tilt to aiming access for +25°/-45° coverage in relation to physical cabinet aim Horizontal 160° (1kHz – 4 kHz average) Rated Maximum SPL 105 dB Continuous (111 dB peak) @ 1m Transformer Taps 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8Ω thru, selectable via switch Environmental Rating IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Dimensions (H x W x D) 23.6" (598 mm) x 4" (102 mm) x 3.7" (93 mm) Net Weight 7.8 lbs (3.5 kg) Shipping Weight 10 lbs (4.54 kg) - Documents
Documents
- In The Box
In The Box
- (1) 2-Part Low-Profile Swivel (Pan) / Tilt Wall Bracket
- (1) Trim Cover for Wall Brackets
- (2) L-Brackets for Top/Bottom or Side/Side Insert Points
- (3) M6 x 12 mm Bolts with Flat Washers & Lock Washers
- (3) M6 x 20 mm Bolts with Flat Washers & Lock Washers
- (3) M6 x 28 mm Bolts with Flat Washers & Lock Washers
- (1) 4 mm Hex Key
- Reviews
Write Your Own Review