- Description
Details
Atlas Sound IP-DM POE+ Indoor LCD Wall Mount Endpoint with Microphone
AtlasIED IP-DM registers as a communication endpoint directly within InformaCast, SA-Announce, and GCK Advanced Notification applications, supporting their visual text broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded and scheduled announcements while leveraging the WAN/LAN Network Architecture.
In addition to visual signaling, the IP-DM can provide audio to support distributed analog public address systems with the convenience of line-level and amplified audio outputs. This line-level output is ideal for use with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones of traditional 25V, 70.7V, or 100V AtlasIED speakers or paging horn speakers.
In addition to the line-level output, the IP-DM provides 2-channels of 15W RMS at 8-ohm amplified output to drive external speakers. It also includes 2 GPI inputs, 1 GPI output and a microphone input for talkback or listen applications.
Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IP-DM display with talkback microphone provides effective communication for all individuals.
- Features
Features
- Auto registration and auto provisioning
- Network controlled, high definition multi-color liquid crystal display
- Multicast enabled network clock control
- Cisco SRST compliant
- Power using IEEE802.3af compliant PoE switch, IEEE802.3at compliant PoE+ switch, or local 24VDC PSU
- RJ-45 female input on PCB
- Specification
System Type IP LCD with Talkbalk Microphone Operation Mode PoE, PoE+, or 24VDC Indicators Network Status (On Back) Amplification General Purpose Interface Two Trigger Inputs
One Relay Output (2A @ 30 VDC)Type Single-Channel Class D Topology AC Power Input PoE or PoE+ and External 24VDC Power Rating (RMS) 12 Watts Max (802.3af)
25 Watts Max (802.3at)THD <0.2% Cooling Passive / Convection Audio Inputs and Outputs Input: Analog Audio Type(s) One Balanced Analog Input: Analog Connectivity Secured Screw Terminal Block Input: Network Audio Type(s) G.711 U-Law
A-Law and G.722 CapableInput: Network Connectivity RJ-45 Female Output: Analog Audio Type(s) One Balanced Line Level Output: Analog Connectivity Secured Screw Terminal Block Output: Digital Audio Type(s) G.711 U-Law
A-Law and G.722 Capable (Multicast)Output: Speaker Level 12 Watts Max (802.3af)
25 Watts Max (802.3at)Output: Speaker Connectivity Two x Secured Screw Terminal Block Display Display Type High Resolution Back-Lit Color LCD Display Color Range Backlit Display - Red, Blue, Green - (With GCK)
Standard - Blue
Text WhiteSurface Lumens 1900 cd/m^2 Minimum, All White Pixels Character Max Height 480 Pixels Viewable Dimensions (H x W) 8.66" (221 mm) x 2.23" (57 mm) Control Time via NTP - Text Controlled via Software Microphone Sensitivity Minus 35 (±4dB)
(0db = 1V/pa, 1kHImpedance Less than 2.2kΩ Directivity Omnidirectional Frequency Range 20Hz - 20kHz Standard Operation Voltage 2V Max. Operation Voltage 10V Current Consumption 0.5 mA Sensitivity Reduction Within Minus 3dB @ 1.5V S/N Ratio More than 62dB Network Ethernet IEEE 802.3 10/100Base-T PoE IEEE 802.3 AF/AT Compliant VLAN IEEE 802.1q Tagging Protocols IP Addressing DHCP / Static Auto-Provisioning HTTP / TFTP Auto-Registration HTTP / Service Location Protocol / IEDNet Time NTP Telephony SIP Enclosure Color White Mounting / Rigging Provisions 4 x Screws, Optional Surface or Flush Mount Enclosures Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC Logo Black and Silver Dimensions (H x W x D) 13.88" (353 mm) x 7.75" (197 mm) x 1.73" (44 mm)` Shipping Weight 3.43 lbs (1.56 kg) - Documents
Documents
- Reviews
Write Your Own Review