- Description
Details
JBL Control 47LP Two-Way 6.5" Coaxial Low-Profile Ceiling Loudspeaker
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Featuring JBL's exclusive conical Radiation Boundary Integrator® (RBI™), the RBI provides a large waveguide for the tweeter while low-frequency sound projects through specially-designed apertures in the RBI, allowing for a seamless integration of coverage between the two coaxially mounted drivers. The result is extremely consistent sound character with very little variation throughout the listening space. The wide coverage allows for the use of fewer loudspeakers compared to speakers with less consistent coverage control, while at the same time providing better coverage of the area.
The shallow backcan on the Control 47LP enable the system to be installed into areas with shallow or restricted mounting depths. The Control 47LP's 165 mm (6.5 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity. The coaxially mounted 25 mm (1 in) soft dome features internal damping for smooth extended response and ferro fluid cooling for enhanced power handling and reduced power compression. The result is crisp, clear highs.
Ideal for small and large projects alike, the Control 47LP is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.- Features
Features
- Two-way 6.5" coaxial, low profile
- Shallow backcan version of 47C/T for locations with limited clearance
- Same sonic signature as Control 47C/T allows mixing and matching of mode
- Proprietary Conical RBI® Technology provides wide, consistent coverage
- Flat frequency response and superior performance
- Elegant design fits any décor
- 8 ohm and 70V/100V operation
- Specification
LF Driver 165 mm with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former HF Driver 25 mm (1 in) soft dome w/ dampening, ferrofluid-cooled Frequency Range (-10 dB) 68 Hz - 20 kHz Frequency Response (± 3 dB) 100 Hz - 17 kHz Power Capacity 150 Watts Continuous Program Power, 75 Watts Continuous Pink Noise Nominal Sensitivity 91 dB Nominal Coverage Angle 120° conical coverage Directivity Factor (Q) 6.5 Directivity Index (DI) 7.9 dB Rated Maximum SPL 110 dB @ 1 m (3.3 ft) average, 116 dB peak Rated Impedance 8 ohms (in bypass mode) Transformer Taps 60W, 30W, 15W, (& 7.5W @ 70V) Transformer Insertion Loss 0.76dB @ 60W, 0.70dB @ 30W, 0.61dB @ 15W, 0.58dB @ 7.5W Input Connectors Two removeable locking 2-pin connectors with screwdown terminals. Max wire 12 AWG (2.5 mm) Knockouts Two (top and side) Ceiling Thickness Range Accommodates tiles/drywall up to 70 mm (2.75 in) thick Cutout Size (Dia) 11.1" (282 mm) Dimensions (Dia x D) 12" (305 mm) x 5.6" (142 mm) Weight 9.5 lbs (4.3 kg) - Documents
Documents
- Reviews
Write Your Own Review