- Description
Details
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
- Features
Features
- Award-winning design
- Optimized for speech
- Sturdy housing
- Made in Germany
- Specification
Connector Clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal) Frequency Response 40 Hz – 20 kHz Max. Sound Pressure Level 140 dB Transducer Principle Pre-polarized condenser microphone Pick-up Pattern Cardioid Nominal Impedance 200 Ohm Phantom Powering P 24 - P 48 Operating Temperature 14° to 122° F Equivalent Noise Level 29 dB (A) Equivalent Noise Level Weighted as per CCIR 468-3 39 dB (CCIR) Current Consumption 5.3 mA Output Voltage Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V Output Voltage Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V Acoustics Boundary layer microphone Dynamic Range 111 dB (A) Sensitivity 10 mV/Pa Dimensions (H x W x D) 0.98" (24.9 mm) x 3.34" (84.8 mm) x 3.93" (99.8 mm) Weight 0.64 lbs (0.29 kg) - Documents
Documents
- Reviews
Write Your Own Review