Commercial Sound Accessories

AtlasIED WTSD-XLR4 4 XLR Input Wall Plate The AtlasIED WTSD-XLR4 is a 2-gang, 4-input XLR passive wall plate designed to be used in conjunction with the WTSD-MIX41K. The WTSD-XLR4 can also be used as a stand-alone wall plate for any balanced mic/line...

AtlasIED WTSD-COVER All-Weather and Security Cover for WTSD Wall Plates The WTSD-COVER is accessory designed to work with WTSD wall plates including the WTSD-MIX31K, WTSD-MIX41K and WTSD-XLR4. Constructed of high grade stainless steel, the WTSD-COVER...

AtlasIED SHS-CVR Clean Room Cover for SHS Speaker The SHS-CVR is designed to work with the SHS-6T2 strategically hidden speaker, where there is a high sensitivity to clean air. The SHS-CVR easily installs over the SHS opening to create a barrier between...

AtlasIED WTSD-PWHUB WTSD Audio / Power and Control Interface The WTSD-PWHUB is designed to be used in conjunction with AtlasIED WTSD wall plate mixers at the head-end (amp rack) in place of the WTSD-PWBOB when additional headroom control and external...

Atlas Sound IED1516LI-E 16 Input Logic Expansion Module The IED1516LI-E is a 16 input expansion module that connects directly to a 1516LI to bring its total input capacity up to 32 inputs that can be driven using dry contact closures or 0 to 50VDC logic...

The SC-188-30-SS is a 30-inch stainless steel safety cable designed to provide an additional layer of security for wall-mounted and ceiling-mounted loudspeakers, lighting fixtures, and other installed equipment. Prefabricated under exacting factory...

Atlas Sound IED1516LI 16 Input Network Logic Module The IED1516LI is a network logic input device used to interface with an IED GLOBALCOM® announcement control system. It provides 16 optically-isolated inputs that can be driven using dry contact...

A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount...

A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM2S and DM3SE surface-mount...

Atlas Sound IED1522LR Dual Logic Input and Dual Relay Output IO Module The IED1522LR Logic / Relay Module is a cost-effective interface module that operates as an integral part of an IED GLOBALCOM® system. It is a web-enabled, programmable relay...

The MTC-25UB-1-WH brackets mount JBL Control Contractor surface-mount loudspeaker to walls, decks and ceilings and provide swiveling capability.

The package of six Bose DesignMax DM8C rough-in brackets for DM8C-SUB and DM8C in-speakers is designed for pre-construction mounting. Pre-construction brackets are used for new home construction or remodeling before sheetrock is hung. These brackets...

The package of six Bose DesignMax DM6C rough-in brackets for DM6C in-speakers is designed for pre-construction mounting. Pre-construction brackets are used for new home construction or remodeling before sheetrock is hung. These brackets allow you to...

The package of six Bose DesignMax DM5C rough-in brackets is compatible with FreeSpace FS4CE and DesignMax DM5C ceiling speakers and is designed for pre-construction mounting. Pre-construction brackets are used for new home construction or remodeling...

The package of six Bose DesignMax DM3C rough-in brackets for DM3C in-speakers is designed for pre-construction mounting. Pre-construction brackets are used for new home construction or remodeling before sheetrock is hung. These brackets allow you to...

Lowell KL200-DSB 200W MONO Attenuator with Key Controlled Switch in a 2-Gang Wall Plate The KL200-DSB 200W volume control with key switch and two-gang wall plate secures volume settings. The key switch allows precise level adjustment of (70V/100V)...

The package of six Bose DesignMax DM2C rough-in brackets is compatible with FreeSpace FS2C and DesignMax DM2C-LP ceiling speakers and is designed for pre-construction mounting. Pre-construction brackets are used for new home construction or remodeling...

AtlasIED ATMASKSC Sound Masking and Commissioning Precision Control The AtlasIED ATMASKSC is specially designed to be used with the M1000A35 Self-Contained Active Masking System, where precision adjusting of level control is required. It employs a...

The Electro-Voice TK-150 is a 70/100 volt transformer kit for EVC, EVF, and EVH.

AtlasIED EGR43B Edgeless Black Round Grille Round, black edgeless grille for use with AtlasIED speaker model FAP43T-W. Grille is press fit and provides more aesthetic appeal by eliminating the appearance of the baffle behind this grille.