- Description
Details
Dante™/AES67 Networked Audio Interface - 4x4 HDMI Audio De-Embedder / Embedder
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network. An adjustable audio delay buffer is included on the Dante™ output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante/AES67 network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.</p>
Applications
- Conference Rooms/Meeting Centers
- Control Rooms
- Video Teleconferencing
- Convention Center Presentation Rooms
- Classrooms and Instructional Facilities
- Features
Features
- HDMI 2.0 compliant (HDCP 2.2) pass-through support for up to 4K/60/4:4:4 video, 2 channel PCM audio
- Highly configurable routing between system inputs and outputs allow PCM HDMI audio from HDMI sources and monitors to be bridged over the Dante/AES67 network
- Simple network control protocol for integration with 3rd party control system
- Front panel indication of Dante status, HDMI connectivity, and digital audio format
- Installer adjustable EDID management settings via software
- 400ms of adjustable lip sync delay on the Dante TX 1-2 audio output path
- Software configuration is supported in Attero Tech unIFY control panel (PC/MAC)
- Specification
Analog Audio Inputs Input Type Balanced 3-pin line level Input Sensitivity -10dBV (consumer) or +4dBu (Pro) software selectable Input Impedance 10 kΩ Maximum Input Levels +20 dBu (+/- 0.5 dB) @ +4dBu Input Sensitivity+10 dBV (+/- 0.5 dB) @ -10 dBV Input Sensitivity THD+N < 0.005% Dynamic Range > 105dB Analog Audio Outputs Output Sensitivity Balanced 3-pin line level Output Impedance 200 Ohms Balanced Maximum Output Level +20 dBu (+/- 0.5 dB) THD+N < 0.005% Dynamic Range > 105dB S/PDIF Audio Inputs Supported Formats S/PDIF ( IEC-60598)2 CH PCM, 24bit Supported Sample Rates 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz THD+N < 0.005% S/PDIF Audio Output (Mirrors HDMI Input Audio) Supported Formats S/PDIF ( IEC-60598)2 CH PCM, 24bitCompressed Multi-channel in Pass Through mode Supported Sample Rates 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz THD+N < 0.005% HDMI Audio Inputs Supported Formats 2 CH PCM, 24bit Supported Sample Rates 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz THD+N < 0.005% HDMI Audio Output Supported Formats 2 CH PCM, 24bitCompressed Multi-channel in Pass Through mode Supported Sample Rates 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz THD+N < 0.005% Video Specifications HDCP V2.2 HDMI V2.0 Supported Resolutions 4096×[email protected],24/25/29.97,30/50/59. 97,60Hz, 3840×[email protected],24/25/29.97,30/50/59. 97,60Hz (UHD), 2048x1080p,[email protected]/24/25/29.97/30 /50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i3D Support Color Space YUV, RGB Chroma Subsampling 4:4:4, 4:2:2, 4:2:0 Max Color Depth 48 bit EDID SW Configurable Hot Plug Detect SW Configurable Bandwidth 18 Gbps (600 MHz) Connectors HDMI Type A Dante Network Physical Layer Ethernet Connector Single RJ-45 Cable Quality CAT-5e or better Transmission Speed 100 Mbps Supported Sample Rates 48kHz Minimum Dante Network Latency 1ms Power Requirements PoE 802.3af PoE PD compliant Power Consumption < 7.6W Max Cable Quality CAT-5e or better Product Compliance FCC CFR 47 Parts 15B Class A, EN55011 ICES-003 CE (EN55022 / EN55024) RoHS REACH Dimensions (H x W x D) 1.06" (26.92 mm) x 9.19" (233.43 mm) x 4" (101.6 mm) Weight 1.3 lbs (0.59 kg) - Documents
Documents
- Reviews
Write Your Own Review