Home /
Commercial Sound Equipment /
Commercial Mixer Amplifiers /
Bogen Communications V250 Power Vector Modular Amplifier

Bogen Communications V250 Power Vector Modular Amplifier

More Views

Bogen Communications V250 Power Vector Modular Amplifier

Part # V250

Model # V250

Availability:

List Price $2,103.51

Pro Acoustics Price Price $1,054.99

Your Savings $1,048.52 (50%)

Qty:

Share with
Add to Wishlist

Description

Details

Bogen's V250 Power Vector Modular Amplifier offers 250 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. It also includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Features

Features

Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
8 module bays
Wide selection of advanced plug-in modules
4 levels of priority between modules
2 module bays capable of handling plug-in signal-processing output modules
11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
Motorized master volume control can be remotely operated
5-position barrier strip, with clamping washers, provides connections for speaker loads
Bridging In/Out connector
External access to priority mute buses
Bridging jack and Mute terminals join multiple Power Vector amps and mixers together
Independent volume control for each of the eight module bays

Specification

Power Output (RMS)
Rated	250W
Typical @ 1 kHz	340W
Frequency Response
Transformer	45 Hz to 20 kHz; +0/-2 dB
Direct	20 Hz to 20 kHz; +0/-1 dB
Distortion
Transformer	< 0.5%**
Direct	< 0.1%** (.05 typical @ 1 kHz)
Signal-to-Noise
Fundamental	-94 dB
With SAX1R Module	-70 dB
With MIC1S Module	-60 dB
With TEL1S Module	-70 dB
Tone Controls
Bass Frequency	100 Hz (+/- 10 dB minimum)
Treble Frequency	10 kHz (+/- 10 dB minimum)
Low Cut Frequency	125 Hz @ -6 dB/octave
Sensitivity Output Regulation	0.4V (at backplane connector) 2 dB or better, no load to full load
Output Impedance
Transformer-Coupled	70V, 25V, 8 ohms (bal or unbal)
Direct Coupled	4 ohms (minimum)
Thermal Emissions (BTU/hr.)	911.9
Inserts
Insert	1VRMS (@FRP)
Insert	50 ohms maximum
Insert	1VRMS
Insert	10k ohms minimum
Bridging In/Out
Bus Level	250 mVRMS (@FRP)
Bus Impedance	10k ohms maximum
Pre-EQ Output
Output Level	4VRMS (@FRP)
Output Impedance	50 ohms maximum
AC Power Receptacle	500 watts maximum power, unswitched
AC Voltage	120V AC, 60 Hz
AC Current	5.5A
Product Weight	32 lbs (14.515 kg)
Dimensions (H x W x D)	3.875" (98.425 mm) x 17.25" (438.15 mm) x 14.75" (374.65 mm)

Reviews