Commercial Power Amplifiers
Talk To An Audio Engineer
Commercial Audio Power Amplifiers for paging, 70 volt audio systems and public address sound systems. We carry all commercial audio brands such as, TOA, Atlas Sound, JBL Commercial, QSC Audio, Bose, Denon, Yamaha Commercial Audio, Crown Audio, Bogen, Rolls Audio, Ashly Audio, Peavey, Crest Audio and many more. Made to run 24/7 and last in any challenging environment. Many of our brands offer UL and cUL Listed models and carry up to five-year warranty.
Featuring the latest commercial amp technology from Crown Audio, QSC Audio and Yamaha Commercial Audio offering cutting-edge amplifiers with energy-efficient green power handling. Feature and option rich capabilities for commercial integrators and technicians such as configurable inputs/outputs, multi-channel amplifiers. DSP signal processing, Networkable, Ethernet IP Addressable, CobraNet, Digital Interfaces with recall created settings from built-in front control panels with fast, simple, configuration without a PC. Low impedance (4/8 Ohms) amplification as well as constant voltage amplification with no transformers required, with 25V, 70V and 100V options. The universal switch-mode power supply's with (70 VAC to 240 VAC 50-60 Hz) for installations worldwide. Technology breakthroughs with a balance of robust functionality, Safety Compliance: cTUVus, CE, FCC, RoHS and awesome reliability at a reasonable cost.
When reliability, price and performance are critical - such as in paging and music distribution for retails stores, churches, offices, stadiums, airports, hospital, schools, emergency-evac and industrial public address sound systems, shop Pro Acoustics for your commercial audio needs.
-
QSC ISA500Ti 2 Channel Commercial Power Amplifier 25, 70, 100 Volt Outputs
The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
TOA DA-500F-HL 4-Channel Digital Power Amplifier
The TOA DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency.
-
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
SoundTube IPD-Hub 2 DSP 2-Channel Amplifier
The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.
-
RDL SF-NP50A Network to 50W Mono Audio Amplifier - 70V or 100V Output
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
List $886.26Price $664.70Savings $221.56 (25%) -
Atlas Sound DPA602 600W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
-
Atlas Sound DPA1202 1200W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Atlas Sound DPA2402 2400W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Bosch PVA-2P500 PAVIRO 2 x 500W Power Amplifier
The Bosch PVA-2P500 class-D amplifier is a 2 x 500W professional audio amplifier for evacuation purposes. It can be operated from both the mains and a DC supply.List $3,557.00Price $3,073.25Savings $483.75 (14%) -
TOA VM-3240E 240W Extension Amplifier
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector.
-
Lab Gruppen C 48:4 1200W 4-Channel Power Amplifier
The Lab.gruppen C 48:4 is the third largest amplifier in the C Series family, delivering an impressive 4 × 1200W at 4 ohms. The exceptional power output plus a long list of protection and monitoring features are all packed into a 2U chassis.
-
Ashly Audio nXp1.52 2 Channel Network Power Amplifier 2 x 1500 Watts @ 2 Ohms With Protea DSP
The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier with Protea DSP that install and configure into virtually any architecture and sound environment.
-
Yamaha PC406-DI Power Amplifier
The Yamaha PC406-DI impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard.
-
Ashly Audio nXp3.02 2-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms with Protea DSP
The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.
-
Yamaha PC412-DI Power Amplifier
The Yamaha PC412-DI impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard.
-
Dynacord IPX5:4 4 x 1250W Multi-Channel Installation DSP Class D Amplifier
The Dynacord IPX5:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.
-
Ashly Audio nXp3.04 4-Channel Network Power Amplifier 2 x 3000W @ 2 Ohms with Protea DSP
The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.
-
Dynacord IPX10:4 4 x 2500W Multi-Channel Installation DSP Class D Amplifier
The Dynacord IPX10:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.
-
Dynacord IPX10:8 8 x 1250W Multi-Channel Installation DSP Class D Amplifier
The Dynacord IPX10:8 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.
-
QSC ISA300Ti 2-Channel Commercial Power Amplifier with 25, 70, 100 Volt Outputs
The QSC ISA300Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA300Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
QSC ISA800Ti 2 Channel Power Amplifier
The QSC ISA800Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA800Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Ashly Audio Pema 8250.70 8-Channel Power Amplifier 8 x 250W @ 70V with Protea DSP
This Ashly Pema 8250.70 powered digital signal processor consists of 8 inputs and 8 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.