Commercial Power Amplifiers

The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.

The TOA DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency.

The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.

The SoundTube STNet Hub 2 DSP amplifier gives designers and installers an IP-based option for traditional 70V/100V distributed audio systems in small to midsize applications.

The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.

The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector.

The Lab.gruppen C 48:4 is the third largest amplifier in the C Series family, delivering an impressive 4 × 1200W at 4 ohms. The exceptional power output plus a long list of protection and monitoring features are all packed into a 2U chassis.

The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier with Protea DSP that install and configure into virtually any architecture and sound environment.

The Yamaha PC406-DI impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard.

The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

The Yamaha PC412-DI impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard.

The Dynacord IPX5:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

The Dynacord IPX10:4 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The Dynacord IPX10:8 is a dedicated amplifier for fixed install application such as e.g. stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high‑power multichannel amplifiers with sophisticated speaker processing.

The QSC ISA300Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA300Ti a rugged, cost-effective power solution for any permanently installed sound system.

The QSC ISA800Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA800Ti a rugged, cost-effective power solution for any permanently installed sound system.