Commercial Power Amplifiers

The SoundTube SA202-II-RDT amplifier is an ultra-compact, 2-channel amplifier with extra heat sink surfaces for extended duty at full power. Rated at 20 watts per channel output at 4 Ohms with max gain of 35 dB.

The Rolls PA202 is a compact class D amplifier. It has 20W per channel stereo @ 4 Ohms and 40W when in bridge/mono mode @ 8 Ohms. The class D low heat design gives this amplifier the ability to be mounted in very tight applications.

The SoundTube SA502 Class D Mini Amplifier features 34 dB maximum gain with 2 x 50 watt output. It has three operating modes stereo, mono or bridged mono and three user selectable inputs balanced stereo (euroblock), stereo unbalanced mini jack, or high level euroblock.

The RDL TX-PA40D Stereo Audio Amplifier is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ω or 8 Ω speakers. It is specifically suited to fixed-gain amplification applications where gain is controlled by other equipment.

The RDL RU-PA40D Stereo Audio Amplifier is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ω or 8 Ω speakers. It is specifically suited to amplification applications where users need to adjust the gain.

The TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging, music distribution for airport, hospital and industrial sound system.

The TOA P-912MK2 900 SERIES power amplifier is great for a wide variety of applications such as public address, paging and music distribution in commercial 70 volt sound systems. One Module Slot accepts TOA plug-in modules for unmatched input flexibility.

The Atlas Sound CP400 dual channel power amplifier is a professional grade audio power amplifier specifically designed for demanding contractor applications. The CP400 features esoteric grade toroidal power supply and output transformers.

The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.

The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.

The TOA P-924MK2 900 SERIES is widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging, music distribution for retail, restaurants, airports, hospitals, schools and industrial sound system applications.

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Atlas Sound HPA2602 Dual Channel Commercial Amplifier has been designed to be versatile for uses in both commercial 70 V / 100 V distributed systems and professional applications that require amplifiers to handle 4 and 2 ohm loads.

The Atlas Sound HPA4202 Dual Channel Commercial Amplifier features front panel detented level controls with a security cover, remote turn on, balanced inputs, fault reporting and an accessory card slot for an optional Dante 2-channel digital audio interface.

The TOA DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Ashly Pema 4125 DSP processor features a new sleek look, 4-channel at 125 watts per channel at 4Ω. The Pema is a matrix mixer with 8-in x 8-out, where any input can be assigned to any output or outputs.

The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.

The Ashly Pema 8125 DSP Processor with it's new sleek look, is a Protea-Equipped Media Amplifier is an 8-channel at 250 Watts or 125 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.

The Ashly Pema 8250 DSP Processor is a Protea-Equipped Media Amplifier. It features 8-channesl at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs.