- Description
Details
The V2-26T with a built-in 200W autoformer with taps at 200W, 100W, 50W and 25W is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile model is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-26T provides additional low frequency and midrange output over that of its sister product, the V2-6. When paired with a subwoofer such as the V2-210S, a V2-26T system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-26T is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-26T loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-26T may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.
- Features
Features
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Constant-directivity rotatable square horn
- Frequency shaded woofers for smooth vertical pattern control
- Terminal strip and NL4-compatible connectors
- Available in standard black or white finishes
- Mounting yoke included with 10° and 20° vertical standoffs
- 200W Autoformer for 70V/100V applications
- Specification
Operating Range 70 Hz to 18 kHz (-10 dB) Frequency Response 90 Hz to 16 kHz (±3 dB) Max Input Ratings 200W continuous, 500W program 28.3 volts RMS, 56.7 volts momentary peak Sensitivity (1W/1m) 92 dB (100 Hz to 12.5 kHz) free space Maximum Output 115 dB SPL / 121 dB SPL (peak) Minimum Impedance 3.5 ohms @ 220 Hz Nominal –6 dB Beamwidth 90° H x 70° V (in vertical position) Crossover Frequency 1.3 kHz Recommended Signal Processing 80 Hz, 24 dB/octave Butterworth high pass filter Drivers LF 2 x 6.5" cone, HF 1 x 1" Driver Protection DYNA-TECH protection circuitry Input Connection Terminal strip Controls None Enclosure Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch Mounting/Rigging Provisions 9 x M6 threaded rigging fittings' 4 x M6 threaded fittings for V-HSS and third-party suspension product Finish Catalyzed polyester two-part paint, black or white Grille Powder coated steel, black or white finish Dimensions (H x W x D) 22.5" (573 mm) x 9.8" (249 mm) x 10.1" (258 mm) Weight (incl. bracket) 30.1 lbs (13.7 kg) Shipping Weight 36 lbs (16.3 kg) - Documents
Documents
- Reviews
Write Your Own Review