- Description
Details
The V2-6T with a built-in 100W autoformer with taps at 100W, 50W, 25W and 12.5W is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-6T system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-6T is also an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-6T loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-6T may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device.
- Features
Features
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Rotatable square horn
- Terminal strip and NL4-compatible connectors
- Available in standard black or white finishes
- Mounting yoke included with 10° and 20° vertical standoffs
- 100W Autoformer for 70V/100V applications
- Specification
Operating Range 90 Hz to 18 kHz (-10 dB) Frequency Response 110 Hz to 16 kHz (±3 dB) Max Input Ratings 100W continuous, 250W program
28.3 volts RMS, 56.6 volts momentary peakSensitivity (1W/1m) 92 dB (100 Hz to 12.5 kHz) free space Maximum Output 112 dB SPL / 118 dB SPL (peak) Minimum Impedance 6 ohms @ 200 Hz Nominal –6 dB Beamwidth 90° H x 70° V (in vertical position) Crossover Frequency 1.3 kHz Recommended Signal Processing 100 Hz, 24 dB/octave Butterworth high pass filter Drivers LF 1 x 6.5" cone, HF 1 x 1" Driver Protection DYNA-TECH protection circuitry Input Connection Terminal strip Controls None Enclosure Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch Mounting/Rigging Provisions 9 x M6 threaded rigging fittings 4 x M6 threaded fittings for V-HSS and third-party suspension product Finish Catalyzed polyester two-part paint, black or white Grille Powder coated steel, black or white finish Dimensions (H x W x D) 15.5" (395 mm) x 9.8" (249 mm) x 10.1" (258 mm) Weight (incl. bracket) 21.7 lbs (9.9 kg) Shipping Weight 28 lbs (12.7 kg) - Documents
Documents
- Reviews
Write Your Own Review