More Views

Crown CTs 4200 4 Channel Power Amplifier (Discontinued)

Part # CTS4200A
Model # CTs 4200

The Crown CTs 4200 amplifier provides exceptional performance, flexibility and value for installed sound applications.


Description

Details

Crown CTs 4200 model is ordered with the networking option can connect to a 100 Mbps Ethernet network using standard Ethernet hardware (switches, Network Interface Cards, and cables) allowing them to be remotely controlled and monitored via Harman Pro System Architect software. In addition, real-time digital audio can be transported over the same Ethernet network via CobraNet™, providing a simple-to-install, single-plug solution for audio distribution, control, and monitoring.

Features

Features

  • High power-density, with four channels (CTs 4200)
  • Selectable constant-voltage (70V/100V) or low-impedance (4/8 ohm) operation for each channel pair
  • FIT (Fault Isolation Topology) circuitry isolates faults within affected channels
  • Proven Crown AB+B Multi-Mode® output topology
  • Continuously-variable fans optimize cooling efficiency
  • Blue Power Indicator fl ashes if the amplifier shuts off due to an under/over voltage condition on the AC mains
Specification
Frequency Response±0.5 dB
Phase Response±35°
Signal to Noise Ratio100 dB
Total Harmonic Distortion (THD)< 0.05%
Damping Factor>180
Maximum Input Level+ 20 dBu
Dual Mode
4 Channels Driven1 kHz
4-ohm (per ch.)260W
8-ohm (per ch.)200W
70V (per ch.)220W
4 Channels Driven20 Hz–20 kHz
4-ohm (per ch.)215W
8-ohm (per ch.)190W
70V (per ch.)220W
1 Channel Driven1 kHz
4-ohm (per ch.)270W
8-ohm (per ch.)220W
70V (per ch.)250W
1 Channel Driven20 Hz–20 kHz
4-ohm (per ch.)225W
8-ohm (per ch.)210W
70V (per ch.)245W
Bridge-Mono Mode
2 Channel-Pairs Driven1 kHz
8-ohm (per ch. pair)520W
16-ohm (per ch. pair)400W
100V (per ch. pair)220W
2 Channel-Pairs Driven20 Hz–20 kHz
8-ohm (per ch. pair)430W
16-ohm (per ch. pair)380W
100V (per ch. pair)220W
1 Channel-Pair Driven1 kHz
8-ohm (per ch. pair)560W
16-ohm (per ch. pair)440W
100V (per ch. pair)250W
1 Channel-Pair Driven20 Hz–20 kHz
8-ohm (per ch. pair)450W
16-ohm (per ch. pair)420W
100V (per ch. pair)245W
Dimensions (H x W x D)3.5” (88.9 mm) x 19” (482.6 mm) x 16.25” (412.75 mm)
Net Weight26 lbs (12 kg)
Shipping Weight30 lbs (14 kg)
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Crown CTs 4200 4 Channel Power Amplifier (Discontinued)