Galaxy Audio ECMR/HH52 UHF Wireless Handheld Microphone System (Discontinued)
Usually arrives in 5-9 business days.
The Galaxy PSER/HH52 Handheld Wireless Microphone System helps clear the stage of unwanted clutter and provide a more professional appearance. The PSE Receiver (PSER) is in an all metal half rack chassis. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries.
The Galaxy PSER/HH52 Handheld Wireless Microphone System helps clear the stage of unwanted clutter and provide a more professional appearance. The PSE Receiver (PSER) is in an all metal half rack chassis. It has two rear mounted diversity antennas (front/remote mounting available), both XLR & 1/4" outputs, and squelch adjustment. The PSER has 16 selectable UHF frequencies. RF & AF indicator, channel number, volume output control, channel selector and IR sensor. Once the channel is selected, it will sync the frequency with a handheld or body pack transmitter with just the push of a button. The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries.
PSER Receiver:
HH52 Handheld Microphone:
| System | |
|---|---|
| Available Channels | 16 |
| Frequency Range | 655 - 679 MHZ |
| Transmitter Output Level | 10dBm |
| Band | UHF |
| Operating Range Under Typical Conditions | 150' (50m) |
| Audio Frequency Response | +/-3dB 60Hz~16KHz |
| Total Harmonic Distortion | +/-30KHz deviation 1KHz tone |
| Dynamic Range | >90dB A-weighted |
| Operating Temperature | Range 14ºF to 122ºF (-10 Cº to +50 Cº) |
| HH52 Handheld Transmitter | |
| Max Audio input level | 0dBV |
| Power Requirements | 2 "AA" size alkaline or rechargeable batteries |
| Battery Life | About 8 hours |
| Dimensions (H x Dia) | 9.8" (250 mm) x 2.1" (53 mm) |
| Weight | 0.59 lbs (0.268 kg) |
| PSER Receiver | |
| Audio Output Level | (+/-30 Khz deviation, 1KHz tone) XLR connector (into 600 load) -12dBV ¼" connector (into 3K load) -18dB |
| Output Impedance | XLR connector |
| Output Impedance | XLR connector 1/4" connector 1K Ohms |
| XLR Output | Impedance balanced Pin1: Ground (cable shield) Pin2: Audio Pin3: No Audio |
| Sensitivity | -93dBm for 30dB |
| Image Rejection | >90dB |
| Power Requirements | 12-18 V DC at 400mA, supplied by external power supply |
| Dimensions (H x W x D) | 1.7" (44 mm) x 8.3" (212 mm) x 6.3" (160 mm) |
| Weight | 1.94 lbs (0.88 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.