| Frequency Range (-10 dB) | 36 Hz – 20 kHz |
|---|---|
| Frequency Response (±3 dB) | 42 Hz – 18 kHz |
| Coverage Pattern | 90° x 50°, rotatable waveguide |
| Directivity Factor (Q) | 11.1 |
| Directivity Index (DI) | 10.4 dB |
| Crossover Modes | Bi-amp/Passive switchable |
| Passive Crossover Frequency | 1.4 kHz |
| Transducer Power Rating (AES) | LF: 1000 W (4000 W peak), 2 hrs 700 W (2800 W peak), 100 hrs HF: 100 W (400 W peak), 2 hrs |
| Long-Term System Power Rating (IEC) | Passive mode: 600 W (2400 W peak), 100 hrs |
| Maximum SPL (Bi-amp) | LF: 126 dB-SPL cont avg (132 dB peak) HF: 133 dB-SPL cont avg (139 dB peak) |
| Maximum SPL (Passive) | 123 dB-SPL cont avg (129 dB peak) |
| System Sensitivity | Passive mode: 95 dB SPL |
| Low Frequency Driver | 1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm(3 in) dual voice coil |
| Nominal Impedance | 8 ohms |
| Sensitivity | 96 dB SPL |
| High Frequency Driver | JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
| Nominal Impedance | 8 ohms |
| Sensitivity | 113 dB SPL |
| Waveguide | PT-H95HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finish birch plywood |
| Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Environmental Specifications | Mil-Std 810; IP-x3 per IEC529 |
| Dimensions (H x W x D) | 28" (711 mm) x 14.5" (368 mm) x 18" (457 mm) |
| Net Weight | 51 lbs (23.1 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
