JBL Control 47HC 2 Way 6.5 inch Ceiling Loudspeaker for High Ceilings - Pair
Usually arrives in 5-9 business days.
The JBL Control 47C/T features extended bass performance with 120° of coverage ideal for a wide variety of applications.
The Control 47C/T features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the Control 47C/T is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Featuring JBL's exclusive conical Radiation Boundary Integrator® (RBI™), the RBI provides a large waveguide for the tweeter while low-frequency sound projects through specially-designed apertures in the RBI, allowing for a seamless integration of coverage between the two coaxially mounted drivers. The result is extremely consistent sound character with very little variation throughout the listening space. The wide coverage allows for the use of fewer loudspeakers compared to speakers with less consistent coverage control, while at the same time providing better coverage of the area.
The large backcan on the Control 47C/T, along with the LF driver design, provides extended bass response for a warm full-bodied tone. The system’s 165 mm (6.5 in) woofer features a polypropylene cone and pure butyl-rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity. The coaxially mounted 25 mm (1 in) soft dome features internal damping for smooth extended response and ferro fluid cooling for enhanced power handling and reduced power compression. The result is crisp, clear highs.
Ideal for small and large projects alike, the Control 47C/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.
| LF Driver | 165 mm with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former |
|---|---|
| HF Driver | 25 mm (1 in) soft dome w/ dampening, ferrofluid-cooled |
| Frequency Range (-10 dB) | 55 Hz - 20 kHz |
| Frequency Response (± 3 dB) | 75 Hz - 17 kHz |
| Power Capacity | 150 Watts Continuous Program Power, 75 Watts Continuous Pink Noise |
| Nominal Sensitivity | 91 dB |
| Nominal Coverage Angle | 120° conical coverage |
| Directivity Factor (Q) | 6.5 |
| Directivity Index (DI) | 7.9 dB |
| Rated Maximum SPL | 110 dB @ 1 m (3.3 ft) average, 116 dB peak |
| Rated Impedance | 8 ohms (in bypass mode) |
| Transformer Taps | 60 W, 30 W, 15 W, (& 7.5 W @ 70 V) |
| Transformer Insertion Loss | 0.76 dB @ 60 W, 0.70 dB @ 30 W, 0.61 dB @ 15 W, 0.58 dB @ 7.5 W |
| Input Connectors | Two removeable locking 2-pin connectors with screw down terminals. Max wire 12 AWG (2.5 mm) |
| Knockouts | Two (top and side) |
| Ceiling Thickness Range | Accommodates tiles/drywall up to 70 mm (2.75 in) thick |
| Suspension Points | Three, on top surface |
| Cutout Size (Dia) | 11.1" (282 mm) |
| Dimensions (Dia x D) | 12" (305 mm) x 10.2" (259 mm) |
| Weight | 11 lbs (5 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.