- Description
Details
The 2-way 15" offers the perfect balance between size and performance. The PRX715 truly is an exception; it’s small, light weight, versatile and powerful. The performance and asymmetrical design make this a perfect choice for musicians, entertainers and DJ’s when portability is key, or when hung by the suspension points, an exceptional light-duty installation speaker. All PRX700 Series speakers were designed to excel in sound reinforcement where challenging audio environments and loud volumes are the norm. For applications requiring full bandwidth sound reproduction, the PRX715 delivers the optimum balance. For live music, recorded music playback and speech the user has the option of tailoring the EQ. A microphone can be directly connected to the speaker input for quick PA applications. Coupled with a PRX700 sub-woofer the system becomes an efficient, full-range sound system.
The PRX715 is comprised of 15" 275G Differential Drive® woofer, a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
The PRX715 is the next step in the highly successful PRX Series and introduces the first use of JBL’s patented Differential Drive® Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling.- Features
Features
- 136 dB peak SPL
- 15" Differential Drive® low-frequency driver for low-distortion and higher SPL
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Optimized EQ for monitor or front-of-house applications
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
- Multi-angle enclosure for main PA or floor monitor applications
- Integrated 36 mm pole mount socket with angle down tilt
- Injection molded handle with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish
- Cloth backed, dent-resistant 16 gauge steel grilles
- Specification
Power Rating 1500 W Frequency Range (-10 dB) Main: 42.9 Hz - 19.5 kHz
Monitor: 43.6 Hz - 19.3 kHzFrequency Response (±3 dB) Main: 58.1 Hz - 17.2 kHz
Monitor: 60.7 Hz - 16.7 kHzCoverage Pattern 90° x 50° nominal Directivity Index (DI) 10.2 dB Directivity Factor (Q) 10.4 Crossover Frequency 1.7 kHz Maximum SPL Normal: 136 dBBoost: 136 dB Dynamic Control (Input) dbx Type IV™ limiter circuit Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced) LF Driver 1 x JBL 275G (15 in) woofer HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver Enclosure Asymmetrical, 18 mm, plywood Suspension / Mounting Dual 36 mm pole socket, 12 x M10 Suspension Points Transport 1 x injection molded handles with backing cup Finish Obsidian DuraFlex™ finish Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Output Connectors 1 male XLR balanced output Dimensions (H x W x D) 28.13" (714.43 mm) x 17.52" (445.13 mm) x 14.12" (358.71 mm) Net Weight 47.5 lbs (21.6 kg) - Reviews
Write Your Own Review