More Views

Listen Tech LR-100 Stationary RF Receiver/Power Amplifier (Discontinued)

Part # LR-100-072
Model # LR-100

Listen's LR-100-072 Stationary RF Receiver/Power Amplifier is a stationary auditory assistance receiver with a built-in power amplifier. When used with a Listen transmitter, the LR-100 can deliver high quality audio for use in a variety of locations and applications.

Description

Details

Listen's LR-100-072 Stationary RF Receiver/Power Amplifier is a stationary auditory assistance receiver with a built-in power amplifier. When used with a Listen transmitter, the LR-100 can deliver high quality audio for use in a variety of locations and applications -- most commonly with a wireless audio distributed system. This unit has Listen's signature Look&Listen LCD Display showing channel, lock, and battery level. A security cover protects auxiliary and receiver volume, adjustable squelch and trim controls. It has an balanced or unbalanced speaker wire output options. Multiple input options give this unit great flexibility. It's powered by a 15 VAC/1000mA power input or 12 VDC battery. An antenna is needed for reception.

Features

Features

  • Superior audio quality – 80 dB signal-to-noise ratio (SNR), setting the industry’s sound quality standard
  • 57 channels
  • 100 % Digital – Listen receivers are digitally-tuned so the transmission won’t drift
  • Limited Lifetime Warranty with hassle-free support
  • Programmability – Unneeded channels can be locked so this receiver will access only one or more channels of your choice
  • Look & Listen LCD shows channel, battery status, signal strength and programming information
  • Uses standard alkaline or nickel-metal hydride (NiMH) batteries
  • Built in SmartCharge won’t allow batteries to overcharge. Charging circuitry is conveniently built into Listen’s receivers
  • Drop in charging contacts for any of Listen’s many charging cases or a charging plug on the side of the unit
  • Adjustable squelch control
  • Selectable audio output
  • Multiple input options
  • Remote control capabilities
  • Optional 12 VDC input
  • Many accessory options make Listen products ideal for a wide range of applications
Specification
Audio
Frequency ResponseSystem: 50 Hz - 15 kHz (±3 dB) Input to Output: 25 Hz to 20 kHz (±3 dB)
Signal-to-Noise Ratio80 dB SQ enabled, 60 dB SQ disabled (A Weighted)
Distortion<2% total harmonic distortion (THD) at 80% deviation
Input/sOne (1) female XLR-1/4 in combo connector, balanced, 0 dBu nominal input level adjustable,
Controls
User ControlsFront: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume
ProgrammingUnit can be programmed so only desired channels are displayed to the user,
Indicators
VU MeterFour (4) LED (three green, one red)
Power LEDIndicated by a green LED when on (front panel)
RF PowerIndicated on the LCD (low, mid, high)
LCDChannel designation, lock status, RF power level, programming (front panel)
SquelchGreen LED illuminates when the unit is squelched
MuteGreen LED illuminates when the output audio is muted
RF
Frequency Range72.025 - 75.950 MHz
Number of Channels17 wide band, 40 narrow band
Frequency Accuracy± .005% stability +32 ºF to +122 ºF (0 ºC to +50 ºC)
Sensitivity.6uV typical, 1 uV maximum for 12 dB SINAD
Antenna TypeLA-123 90° Helical Antenna (72 MHz)
Antenna ConnectorBNC
Output/s(1) male XLR, balanced, 0 dBu nominal output level, +16 dBu maximum, impedance 2k/10 Ohms (line/mic)
PowerSpecifications
Power Supply TypeIn line power supply, Listen part number LA-201
Power Supply Input120 VAC, 60 Hz, 19 Watts
Power Supply Output15 VAC, 1 Amp
Power Supply Connector0.02" (5 mm) OD, 0.01" (2.5 mm) ID, barrel type
Optional Battery12VDC, connected via terminal block
Optional Battery ChargingTrickle charge of optional 12VDC battery through terminal block connection
Environmental
Temperature - Operation-10 ºC (14 ºF) to +40 ºC (104 ºF)
Temperature - Storage-20 ºC (-4 ºF) to +50 ºC (122 ºF)
Relative Humidity0 to 95% Relative Humidity, non condensing
Compliance
RFFCC Part 15, Part 90, Industry Canada
Power Supply ComplianceUL Listed
Physical
ColorDark Grey with white silk screening
Rack Mounting1 rack space height, 1/2 rack space wide, 1 or 2 receivers can be mounted in 1 rack space
Dimensions
(H x W x D)
1.75" (45 mm) x 8.50" (216 mm) x 9.13" (232 mm)
Unit Weight with Power Supply4.2 lbs (1.9 kg)
Weight2.8 lbs (1.3 kg)
Shipping Weight7.0 lbs (3.2 kg)
In The Box

In The Box

  • (1) LR-100-072 Stationary RF Receiver/Power Amplifier (72 MHz)
  • (1) LR-100 manual
  • (1) LA-201 15 VAC Power Supply
  • (1) LA-123 90° Helical Antenna (72 MHz)
  • (1) Hex Wrench
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Listen Tech LR-100 Stationary RF Receiver/Power Amplifier (Discontinued)